Plantronics BUA-200 84014-01 Benutzerhandbuch

Produktcode
84014-01
Seite von 17
Plantronics Voyager PRO UC User Guide
8
3.1 making a test call 
Power the headset on by pressing the power on/off 
button for two seconds. 
The headset indicator light will 
remain solid blue for two seconds to confirm that the headset 
is powered on.
notE
 The USB adapter indicator light will remain solid blue 
when the headset is powered on and paired to the headset. The 
indicator light will remain solid red when the headset is powered 
on but not paired to the headset.
With your headset on, press the call control button on 
the headset.
Set the headset and microphone volume to a 
comfortable level using your softphone or unified 
communication (UC) application set up.
Place a test call using your softphone or UC application.
adjust the receive and listen volume to comfortable 
levels using the volume control in your softphone or UC 
application audio set up. 
You can also fine-tune the listening volume on the 
headset by pressing the volume up button [+] to 
increase the volume and the volume down button [-] to 
decrease the volume. 
7
 
to end the test call, press the call control button on the 
headset.
notE
 Listening and speaking volume levels can also be adjusted 
using the PC “Sounds and Audio Devices” (Windows XP) or the 
“Sound Option” (Windows Vista) from your PC Control Panel.
For your safety, do not use headset at high volumes 
for extended periods of time. Doing so can cause 
hearing loss. Always listen at moderate levels. For more 
information on headsets and hearing, visit:  
www.plantronics.com/healthandsafety.
3 test call