Cisco Cisco UCS C240 M3 Rack Server Weißbuch
19 © 2016 Cisco and/or its affiliates. All rights reserved.
Create Virtual Drives
Select a service profile, click Boot Server, and launch the KVM console. Enter the Cisco FlexStorage Controller BIOS
Configuration Utility (Ctrl+R) to configure the RAID 0 group with the two 1.2T-B drives and create two virtual drives. Complete this
RAID configuration on all the four Cisco UCS B200 M4 servers, as shown in Figure 26.
Configuration Utility (Ctrl+R) to configure the RAID 0 group with the two 1.2T-B drives and create two virtual drives. Complete this
RAID configuration on all the four Cisco UCS B200 M4 servers, as shown in Figure 26.
1. To enter the LSI BIOS settings, press
Ctrl+R while the system is booting (Figure 26).
Figure 26. Open the BIOS Settings
2. On the LSI BIOS page, select the adapter, and press
F2 for operations, and select Create New Virtual Drive (Figure 27)
Figure 27. Create a New Virtual Drive