Cisco Cisco UCS C200 M2 High-Density Rack Server Weißbuch
34 © 2016 Cisco and/or its affiliates. All rights reserved.
9. The
Networking page can be left to acquire IP addresses using Dynamic Host Configuration Protocol (DHCP), or the
addresses can be set statically. Select the Network interface and click
Configure to select the interface traffic types. In the
setup here, the VM Network interface is configured for Management, and the iSCSI1 and iSCSI2 interfaces are configured
for iSCSI and mirroring traffic, as shown in the Figures 48 and 49.
for iSCSI and mirroring traffic, as shown in the Figures 48 and 49.
Figure 48. Deploy SvSAN VSA: Networking