Cisco Cisco Packet Data Gateway (PDG)

Seite von 158
Description
Required Information
An identification string from 1 to 63 characters (alpha and/or numeric) by
which the GTP-U service can be associated with HNB-GW system in HNB-GW
service for GTP-U tunnel towards HNB access network (HNB). It is
pre-configured in Context configuration mode.
Multiple names are needed if multiple GTP-U services is used.
One GTP-U service can be associated with HNB-GW service
instance to provide GTP-U tunnel over Iuh interface towards HNB
access network (HNB) and another GTP-U service needs to be
associated with PS network instance for GTP-U tunnel over IuPS
interface towards PS core network to GSNs.
Important
GTP-U service name
GTP-U Tunnel Innerves Configuration
An identification string from 1 to 63 characters (alpha and/or numeric) by
which the GTP-U service can be associated with HNB-GW system for GTP-U
tunnel towards HNB access network (HNB). Various control parameters can
be configured for GTP-U packet transmission.
Multiple names are needed if multiple GTP services is used.
GTP-U service name
IPv4 addresses assigned to the interface as GTP-U bond address.
This address will be used for binding the GTP-U service (local bind address(es))
for sending/receiving GTP-U packets from/to HNB using GTP-U tunnel.
Multiple addresses and subnets are needed if multiple interfaces will be
configured.
GTP-U Tunnel interface IP
address
The physical port to which the Iuh interface will be bound. The local GTP-U
port used to communicate with the HNB over GTP-U tunnel interface.
GTP-U Tunnel interface
Port
Required Destination Context Configuration Information
Table 6: Required Information for Destination Context Configuration
Description
Required Information
An identification string from 1 to 79 characters (alpha and/or numeric)
by which the destination context will be recognized by the system.
Destination context name
An identification string between 1 and 79 characters (alpha and/or
numeric) by which the interface is recognized by the system.
Multiple names are needed if multiple interfaces will be configured.
Interface name
IPv4 addresses assigned to the interface.
Multiple addresses and subnets are needed if multiple interfaces will be
configured.
IP address and subnet
HNB-GW Administration Guide, StarOS Release 19    
89
HNB-GW Service Configuration Procedures
Required Destination Context Configuration Information