Cisco Headend System Release 2.5 Installationsanleitung
Chapter 2 SR 2.8.1/3.8.1/4.3.1 Upgrade Procedures
48
4036043 Rev B
9 Type y and then press Enter. The system lists some configuration parameters of
system components and asks that you confirm their accuracy.
10 Refer to the notes you took in the
Obtain System Configuration (on page 15)
section of Chapter 1 and verify that the configuration parameters are listed
correctly; then press c to continue. The DNCS software installs on the DNCS.
Note: If you have to change any parameters, follow the on-screen instructions to
do so. Only in rare cases will you have to modify a parameter.
correctly; then press c to continue. The DNCS software installs on the DNCS.
Note: If you have to change any parameters, follow the on-screen instructions to
do so. Only in rare cases will you have to modify a parameter.
11 After the upgrade has completed, follow these instructions to eject the CD.
a Type cd / and then press Enter.
b Type eject cdrom and then press Enter.
b Type eject cdrom and then press Enter.
12 Check the log file for errors. Go to the next procedure in this chapter if the log
file indicates that the DNCS software installed without error.
Notes:
Notes:
The installation log file is in the /var/sadm/system/logs directory of the
DNCS.
DNCS.
The log file for the DNCS software is called SAIdncs_[version #]_install.log.
Call Cisco Services for assistance if the log file reveals errors.