Brother HL-1850 Betriebsanweisung

CHAPTER 4 NETBIOS PEER-TO-PEER PRINTING 

4-3

 

 

If you are unable to use the BRAdmin application, you can use TELNET, a web 
browser or the BRCONFIG Remote console program (BRCONFIG requires the 
IPX/SPX protocol to be installed on your PC). 
 
When you are connected to the print server, enter the default password "access" 
in response to the "#" prompt. Type in anything in response to the "Enter 
Username>" prompt, you will then be at the "Local>" prompt. 
 
Now enter the command: 
 
SET NETBIOS DOMAIN domainname 
EXIT 
 
Where domainname is the name of the domain or workgroup that you are on. If 
you are not sure what your domain name or workgroup name is look in the 
Identification tab in your Windows 95/98/Me/NT 4.0 network applet. 
 
You can also use a standard WWW browser to change the NetBIOS name, to do 
this connect to the print server using its IP address and then select the "Configure 
NetBIOS" option from the Network Configuration screen, enter you 
workgroup/domain name into the "Domain Name" text box. Make sure you 
submit the changes. 
 
 
 

 

This software requires the TCP/IP transport protocols to be installed on your 
Windows 95/98/Me, NT4.0/2000/XP computer. To install those protocols refer 
to your Windows documentation.  
If you are using the TCP/IP protocol, the proper IP address should be defined on 
both the Brother print server and your client PC.