Fujifilm 1x4 Crystal Archive Supreme HD 10.2 cm x 160 m, lustre 1049469 Benutzerhandbuch
Produktcode
1049469
– 3 –
FUJICOLOR CRYSTAL ARCHIVE PAPER SUPREME HIGH DEFINITION
•
FUJIFILM PRODUCT INFORMATION BULLETIN
It is necessary to adjust for the paper type for each pa-
per magazine by changing the paper “Type” specifica-
tion in the “Paper Magazine Registration” menu.
per magazine by changing the paper “Type” specifica-
tion in the “Paper Magazine Registration” menu.
<Changing Paper Type Specification of Paper
Magazine for Frontier 330/350/370/390>
1 Make sure the printer version number in the main
Magazine for Frontier 330/350/370/390>
1 Make sure the printer version number in the main
menu ends with an “i” or some higher letter.
2 Log in to the “4 Setup and Maintenance” menu with
“SE2” for the user name, and a password of “7777”.
3 Select “5 Printer Adjustment/Maintenance” – “1 Pa-
per Magazine Registration” (Menu 451) and change
the paper type to “D” as shown in the table below.
the paper type to “D” as shown in the table below.
Paper
Type
CRYSTAL ARCHIVE PAPER SUPREME
HD
HD
D
4 Select “2 Print Condition Setup and Check” – “1 Pa-
per Condition Setup” (Menu 421) and perform a pa-
per condition setup for all magazines for which the
paper types were changed.
* It is important to click the “Initialize” button to
per condition setup for all magazines for which the
paper types were changed.
* It is important to click the “Initialize” button to
initialize the settings before making the paper
condition setup. After intialization, the first paper
condition setups will deviate by a great degree,
but this will be balanced after the second or third
attempt.
condition setup. After intialization, the first paper
condition setups will deviate by a great degree,
but this will be balanced after the second or third
attempt.
(Please note that clicking the “Initialize” button
will not be possible if you do not log in with a user
name of lab administrator or higher.)
<Changing Paper Type Specification of Paper
Magazine for Frontier 340/355/375/500/550/570/
590>
1 Press the (i) button in the main menu (at the bottom
Magazine for Frontier 340/355/375/500/550/570/
590>
1 Press the (i) button in the main menu (at the bottom
left-hand corner) and confirm that system version
number ends with the letter “i” or some higher letter.
number ends with the letter “i” or some higher letter.
2 Log in to the “Setup and Maintenance” with the
Password “7777”.
3 Click the [Setup and Maintenance] – [02 Print Condi-
tion Setup and Check] – [0221 Paper Magazine Reg-
istration]. Change the paper type to “D” as shown in
the table below.
istration]. Change the paper type to “D” as shown in
the table below.
Paper
Type
CRYSTAL ARCHIVE PAPER SUPREME
HD
HD
D
4 Click the [Setup and Maintenance] – [02 Print Con-
dition Setup and Check] – [0220 Paper Condition
Setup] buttons and perform a paper condition setup
for all magazines for which the paper types were
changed.
Setup] buttons and perform a paper condition setup
for all magazines for which the paper types were
changed.
* It is important to click the “Initialize” button to
initialize the settings before making the paper
condition setup. After intialization, the first paper
condition setups will deviate by a great degree,
but this will be balanced after the second or third
attempt.
condition setup. After intialization, the first paper
condition setups will deviate by a great degree,
but this will be balanced after the second or third
attempt.
(Please note that clicking the “Initialize” button
will not be possible if you do not log in with a user
name of lab administrator or higher.)
<Registration and Setup of the Paper Type
Specification of Paper Magazine for FRONTIER
700 series>
1 On the Maintenance-Application display, Click the
Specification of Paper Magazine for FRONTIER
700 series>
1 On the Maintenance-Application display, Click the
[Maintenance] to access the Maintenance display.
Click [Extension] – [Setup] – [Laser Setup] – [Paper
Specification Registration/Setup].
Click [Extension] – [Setup] – [Laser Setup] – [Paper
Specification Registration/Setup].
2 Select the paper type “D-1” as shown in the table
below.
Paper
Type
CRYSTAL ARCHIVE PAPER SUPREME
HD
HD
D-1
3 Follow the instructions on the Paper specification
registration/setup. Make the test prints, and register
the measurement result.
the measurement result.
8.
PAPER SURFACE AVAILABLE
Glossy and Lustre
9.
SIZES AVAILABLE (glossy and lustre)
• Rolls
Length
Width
80 m
(262 ft)
170 m
(558 ft)
10.2 cm (4 in.)
12.7 cm (5 in.)
15.2 cm (6 in.)
17.8 cm (7 in.)
20.3 cm (8 in.)
25.4 cm (10 in.)
30.5 cm (12 in.)
12.7 cm (5 in.)
15.2 cm (6 in.)
17.8 cm (7 in.)
20.3 cm (8 in.)
25.4 cm (10 in.)
30.5 cm (12 in.)
NOTE Size availability may change without prior notice.
10.
CONTROL STRIPS
Processing control can be provided through the use of
FUJICOLOR PAPER CRYSTAL ARCHIVE Control Strips
- Process CP-40FA/43FA/47L/48S/49E.