Intel SC5250-E Benutzerhandbuch
Chassis
Intel® Entry Server Chassis SC5250-E
Revision
1.02
Intel order number C32881-001
2
2. Chassis
Table 1. Chassis Dimensions (approximate)
Configuration Pedestal
Height
Height
17.8 inches (452mm)
17.6 inches (447mm) if feet are removed
17.6 inches (447mm) if feet are removed
Width
9.256 inches (235mm)
Depth
26 inches (66.04mm)
Clearance Front
17.83 inches (452mm).
19.1 inches with bezel (485mm)
19.1 inches with bezel (485mm)
Clearance Rear
5 inches (12.7mm)
Clearance Side
3 inches (7.62mm) additional side clearance is needed for service access
2.1 System
Color
The Intel
®
Server Chassis SC5250-E is offered in two color options:
•
Dusty beige (GE BR7026) Order code KPTBASE450
•
Black (GE701) Order code KPTBASE450BLK
2.2 Front Bezel Features
The standard front bezel is molded plastic and attaches to the front of the chassis with a hinge
on the right side and two snaps on the left. The snaps at the left attach behind the access cover,
preventing accidental removal of the bezel. The bezel can only be removed by first removing the
server access cover. This provides additional security to the hard drive and peripheral bay area.
The bezel includes a key-locking door that covers the drive cage area.
on the right side and two snaps on the left. The snaps at the left attach behind the access cover,
preventing accidental removal of the bezel. The bezel can only be removed by first removing the
server access cover. This provides additional security to the hard drive and peripheral bay area.
The bezel includes a key-locking door that covers the drive cage area.
The peripheral bays are covered with plastic snap-in cosmetic pieces that must be removed to
add peripherals to the system. Front panel buttons and lights are located along right side the
peripheral bays.
add peripherals to the system. Front panel buttons and lights are located along right side the
peripheral bays.
2.3 Security
A variety of chassis security options are provided at the system level, as listed below.
•
A removable padlock loop at the rear of the system access cover can be used to prevent
access to the microprocessors, memory, and add-in cards. A variety of lock sizes can be
accommodated by the 0.270-inch diameter loop.
access to the microprocessors, memory, and add-in cards. A variety of lock sizes can be
accommodated by the 0.270-inch diameter loop.
•
A two-position key lock/switch will unlock the front bezel.
•
A chassis intrusion switch is provided allowing server management software to detect
unauthorized access to the system cover.
unauthorized access to the system cover.