Intel SC5250-E Benutzerhandbuch

The server board SE7500CW2 support the following feature set:  

•  Dual Intel® Xeon™ processors using the 603-pin INT mPGA package. 
•  400 MHz Front Side Bus 
•  Intel® E7500 server chipset 

MCH memory controller 
P64H2 64-bit I/O Hub 
ICH3-S I/O controller 
FWH Firmware Hub 

•  Support for up to four DDR200 or DDR266 compliant ECC DDR DIMMs providing up to 

4GB

1

 of memory support. 

•  Three separate and independent PCI buses: 

Segment A: 32-bit, 33 MHz, 5 V (P32-A) with four embedded devices: 

 

2D/3D graphics controller: ATI Rage* XL with 8 MB of SDRAM 

 

Two Intel® 10/100 82550PM Fast Ethernet Controllers  

 

ATA-100 RAID controller: Promise Technology* PDC20267 

 

Two PCI slots capable of supporting full length PCI add-in cards 

Segment B: PCI-X 64-bit, 66MHz, 3.3 V, (P64-B) with the following configuration: 

 

Two PCI slots capable of supporting full length PCI add-in cards 

Segment C: PCI-X 64-bit, 133 MHz, 3.3 V (P64-C) with the following device: 

One PCI slot capable of supporting full length PCI add-in cards 

•  LPC (Low Pin Count) bus segment with two embedded devices: 

Super I/O controller chip providing all PC-compatible I/O (floppy, serial, keyboard, 

mouse) as well as integrated hardware monitoring. 

Flash ROM device for system BIOS: Intel

®

 8Mbit N82802AC Flash ROM. 

•  Three external Universal Serial Bus (USB) ports with an additional internal header 

providing one optional USB ports for front panel support. 

•  Two IDE connectors, supporting up to four ATA-100 compatible devices 
•  Support for up to four system fans and two processor fans. 
•  SSI-compliant connectors for SSI interface support: front panel and power connectors.