Fujifilm 1x2 Crystal Archive Supreme HD 17.8 cm x 80 m, glossy 1048294 Benutzerhandbuch

– 3 –

FUJICOLOR CRYSTAL ARCHIVE PAPER SUPREME HIGH DEFINITION  

•

  FUJIFILM PRODUCT INFORMATION BULLETIN

It is necessary to adjust for the paper type for each pa-
per magazine by changing the paper “Type” specifica-
tion in the “Paper Magazine Registration” menu.

<Changing Paper Type Specification of Paper 
Magazine for Frontier 330/350/370/390>
1  Make sure the printer version number in the main 

menu ends with an “i” or some higher letter.

2  Log in to the “4 Setup and Maintenance” menu with 

“SE2” for the user name, and a password of “7777”.

3  Select “5 Printer Adjustment/Maintenance” – “1 Pa-

per Magazine Registration” (Menu 451) and change 
the paper type to “D” as shown in the table below.

CRYSTAL ARCHIVE PAPER SUPREME 
HD

D

4  Select “2 Print Condition Setup and Check” – “1 Pa-

per Condition Setup” (Menu 421) and perform a pa-
per condition setup for all magazines for which the 
paper types were changed.
*  It is important to click the “Initialize” button to 

initialize the settings before making the paper 
condition setup. After intialization, the first paper 
condition setups will deviate by a great degree, 
but this will be balanced after the second or third 
attempt.

  (Please note that clicking the “Initialize” button 

will not be possible if you do not log in with a user 

name of lab administrator or higher.)

<Changing Paper Type Specification of Paper 
Magazine for Frontier 340/355/375/500/550/570/
590>
1  Press the (i) button in the main menu (at the bottom 

left-hand corner) and confirm that system version 
number ends with the letter “i” or some higher letter.

2  Log in to the “Setup and Maintenance” with the 

Password “7777”.

3  Click the [Setup and Maintenance] – [02 Print Condi-

tion Setup and Check] – [0221 Paper Magazine Reg-
istration]. Change the paper type to “D” as shown in 
the table below.

CRYSTAL ARCHIVE PAPER SUPREME 
HD

D

4  Click the [Setup and Maintenance] – [02 Print Con-

dition Setup and Check] – [0220 Paper Condition 
Setup] buttons and perform a paper condition setup 
for all magazines for which the paper types were 
changed.

*  It is important to click the “Initialize” button to 

initialize the settings before making the paper 
condition setup. After intialization, the first paper 
condition setups will deviate by a great degree, 
but this will be balanced after the second or third 
attempt.

  (Please note that clicking the “Initialize” button 

will not be possible if you do not log in with a user 

name of lab administrator or higher.)

<Registration and Setup of the Paper Type 
Specification of Paper Magazine for FRONTIER 
700 series>
1  On the Maintenance-Application display, Click the 

[Maintenance] to access the Maintenance display. 
Click [Extension] – [Setup] – [Laser Setup] – [Paper 
Specification Registration/Setup]. 

2  Select the paper type “D-1” as shown in the table 

below.

CRYSTAL ARCHIVE PAPER SUPREME 
HD

D-1

3  Follow the instructions on the Paper specification 

registration/setup. Make the test prints, and register 
the measurement result.

 
Glossy and Lustre

 
• Rolls

80 m 

(262 ft)

170 m 

(558 ft)

10.2 cm (4 in.)
12.7 cm (5 in.)
15.2 cm (6 in.)
17.8 cm (7 in.)
20.3 cm (8 in.)
25.4 cm (10 in.)
30.5 cm (12 in.)

NOTE   Size availability may change without prior notice.

 
Processing control can be provided through the use of 
FUJICOLOR PAPER CRYSTAL ARCHIVE Control Strips 
- Process CP-40FA/43FA/47L/48S/49E.