Samsung RB31FERNCSA Benutzerhandbuch

operating 

02

 OPERA

TING

reversing the door (optional)

REVERSING THE DOOR 
(OPTIONAL)

Before you reverse the refrigerator door, make 
sure to unplug the refrigerator. Samsung 
recommends that reversing of the door opening 
is only completed by Samsung approved Service 
providers. This will be on a chargeable basis and at 
the customers expense.

Any damage caused while attempting to 
reverse the door opening is not covered 
under the appliance manufactures 
warranty.  
Any repairs requested due to this 
circumstance will be completed on 
a chargeable basis at the customers 
expense.

1.  Before attempting to reverse the refrigerator 

doors ensure that the refrigerator is 
disconnected from the main electricity supply 
and all food stuffs are emptied from inside the 
appliance.

2.  If the customer does not feel confident to follow 

instruction in the user manual, a Samsung 
qualified service engineer must be contacted to 
carry out this change.

3.  Do not plug in Refrigerator just after door 

reverse finished process and wait for at least 
one hour.

Required Tools

Phillips Head 

Driver (+)

Flat Head Driver 

(-)

11 mm Wrench 
(for hinge shaft)

8 mm Socket 

Wrench 

(for bolts)

Hinge Cover / Cap Space Door 

Disassembly of the refrigerator door

1.  Remove the Cover Wire Door.

Cover Wire Door

Cover Wire Door

2.  Disassemble the Cap space Door.

Cap space Door

Cap space Door

3.  Remove the Cover Hinge to push a hook like 

below Pictures.

•  Insert a flat-head screwdriver and put it back as 

shown in Figure #1.

•  As shown in Figure #2, Lever up the cover and 

push a hook as shown in Figure #3. 
(Take care not to damage the CoverHinge Wire 
by pushing it too hard)

•  Disassemble it by pushing the A in Figure #4 by 

hand as Figure #5.

DA68-02833A (EN)-14.indd   25

2015. 5. 19.   �� 7:19