Samsung RS7557BHCSP Benutzerhandbuch

02 OPERA

TING

English - 33

3.   Next, remove the fi xed cap by turning it counter 

clockwise.

4.   Remove the new fi lter’s protective cap and 

remove the old fi lter.

5.   Position and insert the new fi lter into the fi lter 

housing. Slowly turn the water fi lter clockwise 
90º to align with the indication mark on the cover, 
locking the fi lter in position. Make sure that the 
indicator is lined up with the “lock” position. Do 
not over tighten.

For Exterior model

1. Shut off water supply.
2. Note the Flow direction on the fi lter.
3.  Insert water supply tube into the inlet side of the 

fi lter until the tube stop.

4.  After inserting tube, put together the clip strongly.   

The Clip fi x the tube.

5.  Turn on the water and check for leaks. If leaks 

occur, repeat step 1,2,3,4. If leaks persist, 
discontinue use and call your supporting dealer.

6.    Once you have completed this process, hold the 

Ice Type button for 3 seconds to reset the fi lter 
schedule.

7.    Lastly, Dispense 1 L of water through water 

dispenser and throw away. Make sure that water 
fl ows clearly again before drinking.

A newly installed water fi lter cartridge may 
cause water to briefl y spurt from the water 
dispenser. This is due to air getting into the line. 
It should pose no problem to operation.

Ordering replacement fi lters

To order more water fi lter cartridges, contact your 
authorized Samsung dealer.

- Internal  Filter - HAFIN2/EXP
- External Filter - HAFEX/EXP

1

2

3

4

5

Align the 
indication 
mark with 
lock position

Cover fi lter

Sticker
(month 

indicator)

WATER SUPPLY

INLET SIDE

PERMEAT

FLOW DIRECTION

Note :

  

You must also ensure 
that the cut is square 
and not at any sort 
of angle as this could 
cause a leak

DA68-02710A-05.indd   33

DA68-02710A-05.indd   33

2013. 12. 26.   

 7:29

2013. 12. 26.   

 7:29