Samsung Camera NX1 Body Benutzerhandbuch

Appendix > 

Maintaining the camera

Prevent batteries from making contact with metal objects, as this can 
create a connection between the + and – terminals of your battery and 
lead to temporary or permanent battery damage and may cause a fire or 
electric shock.

• 

If the status lamp is off, ensure that the battery is inserted correctly.

• 

If the camera is on while the battery is charging, the battery may not 
fully charge. Turn off the camera before charging the battery.

• 

Do not use your camera when you are charging the battery. This may 
cause a fire or electric shock.

• 

Do not pull the power supply cord to disconnect the plug from the 
power outlet, as this may cause a fire or electric shock.

• 

Let the battery charge for at least 10 minutes before turning on the 
camera.

• 

If you connect the camera to an external power source when the battery 
is depleted, using high energy-consuming functions will cause the 
camera to turn off. To use the camera normally, recharge the battery.

• 

If you reconnect the power cable when the battery is fully charged, the 
status lamp turns on for approximately 30 minutes.

• 

Using the flash or recording videos depletes the battery quickly. Charge 
the battery fully before using the camera.

• 

If the status lamp blinks in red, reconnect the cable, or remove the 
battery and insert it again.

• 

If you charge the battery when the cable is overheated or the 
temperature is too high, the status lamp may blink in red. Charging will 
start when the battery cools down.

• 

Overcharging batteries may shorten battery life. After charging is 
finished, disconnect the cable from your camera.

• 

Do not bend or place heavy objects on the AC cable. Doing so may 
damage the cable.