Samsung OM46D-K Anleitung Für Quick Setup
Quick Setup Guide
Panduan Konfi gurasi Ringkas
Hướng dẫn cài đặt nhanh
English
The colour and the appearance may differ depending on the product, and the specifications are
subject to change without prior notice to improve the performance.
The colour and the appearance may differ depending on the product, and the specifications are
subject to change without prior notice to improve the performance.
Bahasa Indonesia
Warna dan tampilan mungkin berbeda, tergantung produk.
Spesifikasi dapat berubah tanpa pemberitahuan untuk meningkatkan performa.
Warna dan tampilan mungkin berbeda, tergantung produk.
Spesifikasi dapat berubah tanpa pemberitahuan untuk meningkatkan performa.
Tiếng Việt
Mà u sắ c và hì nh dá ng có thể khá c nhau tù y theo sả n phẩ m và để cả i tiế n hoạ t độ ng, cá c
Mà u sắ c và hì nh dá ng có thể khá c nhau tù y theo sả n phẩ m và để cả i tiế n hoạ t độ ng, cá c
thông số kỹ thuậ t có thể sẽ đượ c thay đổ i mà không cầ n thông bá o trướ c.
OM46D-W OM55D-W OM75D-W
OM46D-K OM55D-K OM75D-K
BN68-06814H-01
The terms HDMI and HDMI High-Definition Multimedia Interface, and the
HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC
in the United States and other countries.
External sensor KIT
Kit sensor eksternal
Bộ cả m biế n ngoạ i tí n hiệ u
Troubleshooting Guide
Panduan Mengatasi Gangguan
Hướng dẫn xử lý sự cố
English
Issues
Solutions
The screen keeps switching on
and off.
Check the cable connection between the product
and PC, and ensure the connection is secure.
No Signal is displayed on the
screen.
Check that the product is connected correctly with a
cable.
Check that the device connected to the product is
Check that the device connected to the product is
powered on.
Not Optimum Mode is
displayed.
This message is displayed when a signal from the
graphics card exceeds the product’s maximum
resolution and frequency.
Refer to the Standard Signal Mode Table and set the
maximum resolution and frequency according to the
product specifications.
The images on the screen look
distorted.
Check the cable connection to the product.
The screen is not clear. The
screen is blurry.
Adjust Coarse and Fine.
Remove any accessories (video extension cable, etc)
and try again.
Set the resolution and frequency to the
Set the resolution and frequency to the
recommended level.
The screen appears unstable
and shaky.
Check that the resolution and frequency of the PC
and graphics card are set within a range compatible
with the product. Then, change the screen settings
if required by referring to the Additional Information
on the product menu and the Standard Signal Mode
Table.
There are shadows or ghost
images left on the screen.
The screen is too bright. The
screen is too dark.
Adjust Brightness and Contrast.
Screen colour is inconsistent.
Go to Picture and adjust the Colour Space settings.
White does not really look
white.
Go to Picture and adjust the White Balance settings.
There is no sound.
Check the connection of the audio cable or adjust
the volume.
Check the volume.
The remote control does not
work.
Make sure that the batteries are correctly in place (+/-).
Check if the batteries are flat.
Check if the batteries are flat.
Check for power failure.
Make sure that the power cord is connected.
Check for any special lighting or neon signs switched
Make sure that the power cord is connected.
Check for any special lighting or neon signs switched
on in the vicinity.
Bahasa Indonesia
Masalah
Solusi
Layar hidup dan mati terus
menerus.
Periksa sambungan kabel antara produk dan PC, serta
pastikan kabel tersambung dengan kencang.
No Signal ditampilkan pada
layar.
Pastikan produk telah tersambung dengan benar
menggunakan kabel.
Pastikan perangkat yang tersambung ke produk telah
Pastikan perangkat yang tersambung ke produk telah
dihidupkan.
Not Optimum Mode
ditampilkan.
Pesan ini ditampilkan bila sinyal dari kartu grafis
melampaui resolusi dan frekuensi maksimum produk.
Lihat Tabel Mode Sinyal Standar dan tetapkan resolusi
serta frekuensi maksimum menurut spesifikasi
produk.
Gambar di layar tampak
terdistorsi.
Periksa sambungan kabel ke produk.
Layar tidak jelas. Layar buram.
Sesuaikan pengaturan Coarse dan Fine.
Lepaskan setiap aksesori (kabel ekstensi video, dsb.),
lalu coba lagi.
Atur resolusi dan frekuensi ke tingkat yang
Atur resolusi dan frekuensi ke tingkat yang
disarankan.
Layar tampak tidak stabil dan
goyang.
Pastikan resolusi dan frekuensi PC serta kartu grafis
ditetapkan dalam kisaran yang kompatibel dengan
produk. Setelah itu, ubah pengaturan layar jika perlu
dengan melihat Informasi Tambahan dalam menu
produk dan Tabel Mode Sinyal Standar.
Terdapat bayangan yang tersisa
di layar.
Layar terlalu cerah. Layar terlalu
gelap.
Sesuaikan pengaturan Brightness dan Contrast.
Warna layar tidak konsisten.
Buka Picture dan sesuaikan pengaturan Colour
Space.
Warna putih tidak tampak putih.
Buka Picture dan sesuaikan pengaturan White
Balance.
Tidak ada suara.
Periksa koneksi kabel audio atau atur volume.
Periksa volume suara.
Remote control tidak berfungsi.
Pastikan baterai telah dimasukkan dengan benar (+/-).
Periksa apakah daya baterai habis.
Periksa apakah daya baterai habis.
Periksa kegagalan daya.
Pastikan kabel daya telah tersambung.
Periksa apakah ada cahaya khusus atau tanda neon
Periksa apakah ada cahaya khusus atau tanda neon
yang menyala di sekitarnya.
Tiếng Việt
Cá c vấ n đê
Giả i phá p
Màn hình liên tục bật và tắt.
Kiểm tra kết nối cáp giữa sản phẩm và PC, và
đảm bảo kết nối chắc chắn.
No Signal đượ c hiể n thị trên
mà n hì nh.
Kiể m tra xem sản phẩm có kết nối đúng với cáp
chưa.
Kiểm tra xem thiết bị kết nối với với sản phẩm có
bật không.
Not Optimum Mode đượ c
hiể n thị .
Thông báo được hiển thị khi một tín hiệu từ card
màn hình vượt quá độ phân giải và tần số tối đa.
Tham khảo Bảng chế độ tín hiệu tiêu chuẩn và
cài đặt độ phân giải và tần số tối đa theo thông
số sản phẩm.
Hình ảnh trên màn hình bị
biến dạng.
Kiểm tra kết nối cáp với sản phẩm.
Màn hình không rõ . Màn hình
bị mờ.
Điề u chỉ nh
Coarse và Fine.
Gỡ bỏ bất kỳ thiết bị (cáp video nối dài v.v) và
thử lại.
Cài đặt độ phân giải và tần số tới mức khuyến cáo.
Màn hình không ổn định và
rung.
Kiểm tra xem độ phân giải và tần số của máy
tính và card đồ họa có được cài đặt ở mức
tương thích với sản phẩm hay không. Sau đó,
thay đổi cài đặt màn hình nếu được yêu cầu
bằng cách tham khảo Thông tin bổ sung về
trình đơn sản phẩm và Bảng chế độ tín hiệu tiêu
chuẩn.
Có bóng hoặc hình ảnh mờ
còn lại trên màn hình.
Màn hình quá sáng. Màn
hình quá tối.
Điề u chỉ nh
Brightness và Contrast.
Mà u mà n hì nh không đồ ng
nhấ t.
Đi tớ i
Picture và điề u chỉ nh cà i đặ t Colour
Space.
Màu trắng trông không hẳn
là trắng.
Đi tớ i
Picture và điề u chỉ nh cà i đặ t White
Balance.
Không có âm thanh.
Kiể m tra kế t nố i củ a cá p âm thanh hoặ c điề u
chỉ nh âm lượ ng.
Kiểm tra âm lượng.
Điều khiển từ xa không hoạt
động.
Đảm bảo rằng pin được đặt đúng chỗ (+/-).
Kiểm tra xem pin đã hết hay không.
Kiểm tra liệu không có điện.
Kiểm tra liệu không có điện.
Đảm bảo rằng dây nguồn được kết nối.
Kiểm tra xem có bóng đèn đặc biệt hay ánh đèn
neon gần đó hay không.
Reverse Side
Sisi Belakang
Mặ t sau
English
1
Receives the remote control signal via the external sensor board and outputs the signal via LOOP OUT.
2
Supplies power to the external sensor board or receives the light sensor signal.
3
DVI IN: Connects to a source device using a DVI cable or HDMI-DVI cable.
MAGICINFO: To use MagicInfo, make sure to connect the DP-DVI cable.
4
Connects to a source device using an HDMI cable.
5
Connects to a PC using a DP cable.
6
Connects to a source device using a D-SUB cable.
7
Connects to another product using a DP cable.
8
Connects to a source device using the AV/Component adapter.
9
Connects to the audio of a source device.
0
Receives sound from a PC via an audio cable.
!
Connects to MDC using a LAN cable.
@
Connect to a USB memory device.
#
Connects to MDC using an RS232C cable.
$
Connect to an SD memory card.
%
Connect network boxes to the indicated areas
Bahasa Indonesia
1
Menerima sinyal remote control via papan sensor eksternal dan memancarkan sinyal via LOOP OUT.
2
Mengalirkan arus ke papan sensor eksternal atau menerima sinyal sensor cahaya.
3
DVI IN: Menyambung ke perangkat sumber menggunakan kabel DVI atau kabel HDMI-DVI.
MAGICINFO: Untuk menggunakan Magicinfo, jangan lupa sambungkan kabel DP-DVI.
4
Terhubung ke perangkat sumber lewat kabel HDMI.
5
Menghubungkan ke PC dengan kabel DP.
6
Terhubung ke perangkat sumber lewat kabel D-SUB.
7
Menghubungkan ke produk lain dengan kabel DP.
8
Menghubungkan monitor ke perangkat sumber menggunakan adaptor AV/Komponen.
9
Menyambung ke audio perangkat sumber.
0
Menerima suara dari PC via kabel audio.
!
Terhubung ke MDC dengan kabel LAN.
@
Menghubungkan ke perangkat USB.
#
Terhubung ke MDC dengan kabel RS232C.
$
Hubungkan ke kartu memori SD.
%
Hubungkan kotak jaringan ke area yang ditunjukkan
Tiếng Việt
1
Nhậ n tí n hiệ u điề u khiể n từ xa qua bả ng cả m biế n bên ngoà i và xuấ t tí n hiệ u qua LOOP OUT.
2
Cắ m nguồ n và o bả ng cả m biế n bên ngoà i hoặ c nhậ n tí n hiệ u cả m biế n á nh sá ng.
3
DVI IN: Kết nối với thiết bị nguồn tín hiệu bằng cách sử dụng cáp DVI hoặc cáp HDMI-DVI.
MAGICINFO: Để sử dụ ng MagicInfo, hã y đả m bả o kế t nố i cá p DP-DVI.
4
Kế t nố i vớ i thiế t bị nguồ n bằ ng cá p HDMI.
5
Kế t nố i vớ i PC bằ ng cá p DP.
6
Kế t nố i vớ i thiế t bị nguồ n bằ ng cá p D-SUB.
7
Kế t nố i vớ i sả n phẩ m khá c bằ ng cá p DP.
8
Kế t nố i vớ i thiế t bị nguồ n bằ ng bộ điề u hợ p thà nh phầ n/AV.
9
Kết nối với âm thanh của thiết bị nguồn tín hiệu.
0
Nhậ n âm thanh từ PC qua cá p âm thanh.
!
Kế t nố i vớ i MDC bằ ng cá p LAN.
@
Kế t nố i vớ i thiế t bị nhớ USB.
#
Kết nối với MDC bằng cách sử dụng cáp RS232C.
$
Kết nối với thẻ nhớ SD.
%
Kết nối hộp mạng với các khu vực được chỉ báo
Checking the Components
Memeriksa Komponen
Kiểm tra các thành phần
1
2
3
+
+
-
-
4
5
6
7
8
9
English
Bahasa Indonesia
Tiếng Việt
1
Quick Setup Guide
1
Panduan Konfigurasi Ringkas
1
Hướng dẫn cài đặt nhanh
2
Warranty card
(Not available in some
locations)
(Not available in some
locations)
2
Kartu Garansi
(Tidak tersedia di beberapa
lokasi)
(Tidak tersedia di beberapa
lokasi)
2
Thẻ bảo hành
(Không có ở một số khu
vực)
3
Regulatory guide
3
Panduan regulasi
3
Hướng dẫn điều chỉnh
4
Batteries
(Not available in some
locations)
(Not available in some
locations)
4
Baterai
(Tidak tersedia di beberapa
lokasi)
(Tidak tersedia di beberapa
lokasi)
4
Pin
(Không có ở một số khu
vực)
5
Remote Control
5
Remote Control
5
Điều khiển từ xa
6
Power cord
6
Kabel daya
6
Dây điện nguồn
7
D-SUB cable
7
Kabel D-SUB
7
Cáp D-SUB
8
Holder-Ring (4EA)
8
Cincing Penahan (4EA)
8
Vò ng đỡ (4 Chiếc)
9
External remote control
sensor
sensor
9
Sensor kendali jarak jauh
eksternal
eksternal
9
Bộ cảm biến điều khiển từ
xa bên ngoài
Remote Control
Remote Control
Điều khiển từ xa
English
Bahasa Indonesia
1
Display or hide the onscreen display menu, or return to
the previous menu.
the previous menu.
1
Menampilkan atau menyembunyikan menu tampilan
di layar maupun kembali ke menu sebelumnya.
di layar maupun kembali ke menu sebelumnya.
2
Go to Home Launch Button.
2
Tombol Buka Go to Home.
3
Move to the upper, lower, left or right menu, or
adjust an option's setting.
Confirm a menu selection.
adjust an option's setting.
Confirm a menu selection.
3
Bergulir ke menu di atas, bawah, kiri, maupun kanan,
atau menyesuaikan pengaturan opsi.
Mengkonfirmasi pilihan menu.
atau menyesuaikan pengaturan opsi.
Mengkonfirmasi pilihan menu.
4
Exit the current menu.
4
Keluar dari menu aktif.
Tiếng Việt
1
Hiển thị hoặc ẩn trình đơn hiển thị trên màn hình,
hoặ c trở về̀ trình đơn trướ c.
2
Nút Khởi chạy
Go to Home.
3
Chuyển sang trình đơn lên trên, xuống dưới, bên trái
hoặc phải hoặc điều chỉnh cài đặt của một tùy chọn.
Xác nhận lựa chọn một trình đơn.
Xác nhận lựa chọn một trình đơn.
4
Thoát khỏi trì nh đơn hiện tại.
HOME
MENU
MagicInfo
Player I
TOOLS
INFO
EXIT
RETURN
1
2
3
4
To place batteries in the remote control
Untuk memasukkan baterai ke remote control
Để đặt pin vào điều khiển từ xa
English
1
Light sensor
Automatically detects the intensity of ambient light around a selected display and adjusts the screen brightness.
Automatically detects the intensity of ambient light around a selected display and adjusts the screen brightness.
2
Remote Control Sensor
Aim the remote control towards this spot on the LCD Display.
Aim the remote control towards this spot on the LCD Display.
- Using other display devices in the same space as the remote control of this product can cause the other display devices to
be inadvertently controlled.
3
Power indicator
Turns off in power-on mode and blinks green in power-saving mode.
Turns off in power-on mode and blinks green in power-saving mode.
Bahasa Indonesia
1
Sensor cahaya
Mendeteksi intensitas cahaya di sekitar tampilan yang dipilih dan menyesuaikan kecerahan layar secara otomatis.
Mendeteksi intensitas cahaya di sekitar tampilan yang dipilih dan menyesuaikan kecerahan layar secara otomatis.
2
Sensor remote control
Arahkan remote control ke arah titik ini pada Tampilan LCD.
Arahkan remote control ke arah titik ini pada Tampilan LCD.
- Menggunakan perangkat tampilan lain di ruang yang sama dengan remote control produk ini dapat mengakibatkan
perangkat tampilan lain terkontrol tanpa disengaja.
3
Indikator Daya
Mati dalam modus aktif dan berkedip hijau dalam modus hemat daya.
Mati dalam modus aktif dan berkedip hijau dalam modus hemat daya.
Tiếng Việt
1
Cảm biến ánh sáng
Tự động dò tìm cường độ ánh sáng xung quanh ở quanh màn hình hiển thị được lựa chọn và điều chỉnh độ sáng màn hình.
2
Bộ cảm biến Điều khiển từ xa
Hướng bộ điều khiển từ xa về điểm này trên Màn hình LCD.
- Sử dụng các thiết bị màn hình khác trong cùng một không gian như điều khiển từ xa của sản phẩm này có
thể làm cho thiết bị màn hình vô tình bị điều khiển.
3
Chỉ báo nguồn
Tắ t trong chế độ bậ t nguồ n và nhấ p nhá y xanh lụ c trong chế độ tiế t kiệ m điệ n.
OM46D
OM55D
OM75D
1
2
3
%
4
#
5
$
6
7
8
0
@
!
9
The OM**D-K model does not come with a BACK-COVER.
Model OM**D-K tidak menyertakan PENUTUP BELAKANG.
Mẫu OM**D-K không có LỚP VỎ MẶT SAU.
Model OM**D-K tidak menyertakan PENUTUP BELAKANG.
Mẫu OM**D-K không có LỚP VỎ MẶT SAU.
The OM**D-K model does not come with a BACK-COVER.
Model OM**D-K tidak menyertakan PENUTUP BELAKANG.
Mẫu OM**D-K không có LỚP VỎ MẶT SAU.
Model OM**D-K tidak menyertakan PENUTUP BELAKANG.
Mẫu OM**D-K không có LỚP VỎ MẶT SAU.
OM46D OM55D
OM75D
1 2 3
[OMD-ASIA-QSG]BN68-06814H-01.indd 1
2014-12-19 10:13:04