Samsung SHR-8082P Benutzerhandbuch

English

 

●  
USING THE DVR

When the backup setup is done, press <OK>.

If no available device is recognized for backup, <OK> button is not activated.

The application may slow down during the backup.

When a CD/DVD or memory device is used for backup, it is not available to use the full capacity of the media since 
the system consumes a part of its capacity.

If a CD or DVD media causes errors, the disc tray opens and closes a several times, and eventually backup process 
will fail. In this case, replace the CD/DVD media and try again.

Pressing the <Exit> during the backup will return to the previous menu, while the backup progresses.

It provides networked monitoring of Live screen from a remote place, and supports mail forwarding function with 
events. You can confi gure the network environment which enables such functions.

You can set the network connection route and protocol.

Sets the protocol and environment of the network.

Using the mouse may help easy setup.

Press the [MENU] button on the remote control or front 
panel.

Use the left/right button (◄ ►) to select <Network>.
Network menu is selected.

Use the up/down buttons (▲▼) to move to <Connection 
Mode>, and press [ENTER] button.

Select <Connection>.
A window of connection mode setup appears.

Use direction buttons (▲▼◄ ►) to move to a desired 
item, and set the value.

Connection Mode : Sets the network connection mode.
Bandwidth : Sets the maximum data fl ow to be transferred.
(Upload speed)
Options will vary depending on the selected connection 
mode.

- For <Static IP>, <Dynamic IP> : Select one from 128 

kbps ~ 2Mbps, and Unlimited.

- For <ADSL>, select one from 128 kbps ~ 600 kbps.



J






M



•
•

Logout 

Exit

 Connection Mode 

Static IP

 Bandwidth 

2Mbps

 OK 

Cancel

 IP 

192.168.  1.200

 Gateway 

192.168.  1.    1

 Subnet Mask 

255.255.255.  0

 DNS 

Manual

 

168.126.  63.   1