Samsung RL70LBPN Benutzerhandbuch

setting up 

01

 

SETTING

 UP

Reattach the former right hinge 
on the left side and the former 
left hinge on the right side by 
using 2bolts.

Separate stopper by removing 
1 screw on the right lower 
side of freezer and assemble 
the stopper on the left side by 
reversing it.

Replace the bottom hinge cap 
cover.

Remove 1 cap and 3 screws on the 
left side of the refrigerator where 
you will reattach the left side middle 
hinge. (Refer to the left picture.) And 
replace them on the former right side 
middle hinge position like the right 
picture. When removing 2 plastic 
screws, pick them up with tweezers 
(forceps, nippers, pliers) while 
turning them with screwdriver(+).

Replace the freezer door on the 
left side bottom hinge. Replace 
the left side middle hinge. You 
can get it from the installation 
tool (box) supplied with your 
new Samsung refrigerator. 
And reattach it by using 1 
screw and 2 bolts. (Should use 
screwdriver(+) for screw and 
wrench for bolts.)

Cover the middle hinge cap.

Separate the stopper(

①) by 

removing 3 screws on the right side. 
(Refer to the picture.) And replace 
them on the right side. Remove 3 
screws on the left side. (Refer to 
the picture.) And then, replace the 
stopper(

①) separated from the right 

side. And reattach it by using those 
removed 3 left side screws on the 
left side.

After removing cap on the upper 
left side of fridge door, reattach 
the fridge door on the right side.

Separate the cover on the left 
upper side of refrigerator by 
removing 1 screw, and reattach 
it on the right upper side. (Be 
careful not to strip wire coating.)

1

①

DA68-01817M-EN.indd   11

2011.1.11   5:14:28 PM