Samsung SHR-3040 Benutzerhandbuch

English

 



Connection port used to control an external device such as the 
PTZ and speed dome camera.

Connect the external device to the RS-485 port (PIN 1:-, 2:+) in 
the rear [FUNCTION] panel.

Check if the RS-485 device is compliant with the DVR.

Please take care about the polarity (+/-) of RS-485 when 
installing it.

The polarity may differ, depending on the camera model.

For more information, refer to the user guide of the PTZ 
camera.

Connection port used to sound the alarm.

PIN 3: RELAY COM / 4: RELAY NC / 5: RELAY NO 

Connect one strand of the signal cable (two strands) to the [COM] 
port and connect the other strand to a desired alarm output port.

Connection port used to receive the alarm signal.

PIN 6: ALARM GND, 7: ALARM 4, 8: ALARM 3, 9: ALARM 2, 10: ALARM 1

Connect one strand of the sensor signal cable (two strands) to the [GND] port and connect the other strand 
to a desired alarm input port.

M







•

•

MIC

SPOT MONITOR

MOUSE

MONITOR

CAMERA 

SPEAKER

VGA 

MONITOR

RS-485

ALARM OUT

ALARM IN