Samsung SHR-3040 Benutzerhandbuch

English

 



PRE ALARM RECORD: In event recording, set the advance recording time before an actual event.

Pre alarm settings will be changed according to the frame rate.

HDD REMAINING: Shows the remaining and total capacity of the current HDD.

TIME REMAINING: Displays the expected recordable time in the “DATE(D)/HOUR(H)/MIN(M)” format 
based on the selected quality.

When done, select <OK>.
Your setting will be applied.
If you select <DEFAULT>, the settings will be restored to the factory default.

To return to the previous menu, select <ESC>.

You can set the recording schedule.

See the previous section to repeat steps 1~3. (Page 28)

Use the up/down (

▲▼) button to select <SCHEDULE 

SETUP>, and press [OK].
The “SCHEDULE SETUP” screen appears.

Use the direction (

▲▼◄ ►) buttons to move to a desired 

box, and press [OK].
Each time you press the button, the box setting will switch 
to “CONTINUE > MOTION > ALARM > MOTION & 
ALARM > STOP RECORDING” in sequence.

ALL: Select this to set the entire week.

DAY: Select this to set a specifi c day of the week.

HOUR: Select this to set the time range.
You can set the time range by the two hours.

When done, select <OK>.
Your setting will be applied.
If you select <DEFAULT>, the settings will be restored to the factory default.

To return to the previous menu, select <ESC>.

•

J



•
•

•
•
•

 DEFAULT 

ESC

 OK

ALL

SUN

MON

TUE

WED

THU

FRI

SAT

0 0 0 2 0 4 0 6 0 8 1 0 1 2 1 4 1 6 1 8 2 0 2 2

  

ESC

RECORD SETUP
SCHEDULE SETUP