Samsung Electric Dryers With Steam Benutzerhandbuch

Seite von 168
Installation requirements
English
10 
Installation requirements
Read through the following instructions before installing the dryer, and keep this manual 
for future reference.
WARNING
The control board and inlet valve are intentionally not grounded and may present a risk of 
electric shock only during servicing.
Service personnel - Do not contact these parts while the appliance is energized.
Key installation requirements
•  A grounded electrical outlet.
•  A power cord for electric dryers (except 
in Canada).
•  Gas lines (for gas models) that must 
meet national and local regulations.
•  An exhaust system made of rigid metal 
or flexible stiff-walled metal exhaust 
ducting.
WARNING
Remove the door from all discarded 
appliances to prevent a child from 
suffocating.
Location considerations
•  Adequate clearances between the dryer 
and adjacent walls or other surfaces.
•  Adequate air circulation for ventilation 
and gas combustion.
•  Away from water and weather.
WARNING
•  Make sure to exhaust the dryer 
outdoors to reduce the risk of fire.
•  Keep the dryer area clear of 
combustible materials, gasoline, and 
other flammable vapors and liquids.
•  Do not install other fuel-burning 
appliances around or in the same place 
as the dryer.
Alcove or closet installation
Minimum clearances between the dryer 
and adjacent walls or other surfaces are:
2” in front, 17” on top, 1” on either side, 
and 5” in the back.
The closet front must have two 
unobstructed air openings for a combined 
minimum total area of 72 in² with 3” 
minimum clearance on the top and bottom. 
A louvered door with equivalent space 
clearance is acceptable.
DV8700K-03170T-01_EN (US).indd   10
2015-12-08     1:05:00