Samsung SR8900 ROBOT VC with Auto-Emptying Dust Bin, 40 Watt, Silver Metal Benutzerhandbuch

 

operating

Charging

When the product is initially purchased, the battery is fully 
discharged, and you must Charger (station) the Robot 
vacuum manually. 

Turn on the Power Switch at the bottom of the product.

1.  After aligning the Charger (station) pins of the 

main unit with the Charger (station) pin of the 
Charger (station), press the main unit until you hear 
“recharging is now starting” sound.

 

- The Charging Lamp turns green.

2.  Check the Charger (station) status of the Robot vacuum.

 

- When charging starts, “the amount of remaining battery power” 

and “

” are displayed on the status display panel in this 

sequence.

 

- When charging is complete, the battery level indicator and 

“FULL” will be displayed in the display panel.

Flash

Flash

 

■

When the battery level display flashes while cleaning, 
the Robot vacuum stops vacuuming and automatically 
charges itself at the charger. 

 

■

If the Robot vacuum starts the current cleaning run at a 
location other than the charging station and fails to locate 
the charging station while cleaning, it will stop near the 
location where it started cleaning.

 

■

When the battery level flashes and “Lo” is displayed 
while cleaning, Robot vacuum cannot be operated by 
the remote control or the buttons on the main unit. In this 
case, directly carry the Robot vacuum to the charger to 
charge the battery. (This is when the battery is completely 
discharged.)

<Charge display>

Charge 
complete

Charging Required 

charging

Power lamp 

Charging lamp 

Power lamp 

Charging lamp 

Charging

Fully charged

DJ68-00630D (EN)-00.indd   24

2014. 7. 23.   �� 6:14