Samsung SMO-210TRP Benutzerhandbuch

Seite von 18
1. Model Name
- SMO-210MP
- SMO-150MP
2. Video Input
- CAMERA 8 Input : 1.0Vp-p, 75Ω (vertical), 
RJ-45 Type, CVBS
- VCR 1 Input (to Video Out of VCR) : 1.0Vp-p, 75Ω (vertical),  
S-Jack Type, CVBS
3. Video Output
- Monitor 2 Output
- SPOT : 1.0 Vp-p, 75Ω (vertical), S-Jack Type, CVBS
- SLAVE : 1.0 Vp-p, 75Ω (vertical), S-Jack Type, CVBS
- VCR 1 Output : 1.0 Vp-p, 75Ω (vertical), S-Jack Type, CVBS
4. Voice Input
- CAMERA 8 Input: RJ-45 Type
- VCR 1 Input (Audio Out-VCR) : S-Jack Type
5. Voice Output
- SPOT Audio
- VCR Audio
6. Alarm/Motion Function: Connected Alarm Box/Camera
- A/O (HOT, COLD): Relay Active
- A/R (Alarm Reset): Open Collector “L ” Level, 
Pulse Width = 150ms or above
-Alarm Hold Time: Select 5sec, 15sec, 30sec, 1min, 3min, 5min,
10min, 20min, 30min, or AUTO.
- If AUTO is selected, the Alarm will be on during the time the Alarm 
trigger is received.
7. Sequence
- Select between 01 sec to 30 sec.
8. Event Replay
- Alarm/Motion/Loss: Max. 16 Frames per Channel
- Door Bell: Max. 8 Frames
9. List
- Alarm/Loss/Motion: Saving Max. 50
- Door Bell: Max. 8
10. Multi Screen
- Full, 4, 8, 9, 16, Zoom, PIP
11. Horizontal Resolution  
- 400 TV Lines or more (Live Mode Full Screen)
12. Memory Back Up
- 5 Years or more
13. Operation Temperature
- 0 °C ~ 40 °C
14. Built-in Clock 
- ± 1 Minute/Month or less
15. CRT
- SMO-210MP : 21”FLAT CRT
- SMO-150MP : 15”FLAT CRT
16. Dimensions (W x H x D)
- SMO-210MP : 520 x 509 x 486
- SMO-150MP : 388 x 459 x 379
17. Weight
- SMO-210MP : 28kg (without packing)
32.5kg (with packing)
- SMO-150MP : 15.2kg (without packing)
18.5kg (with packing)
18. Power consumption 
- Please see the regulatory label attached  on the back of the monitor.
19. Video system 
- SMO-210MP/150MP : ONLY PAL VIDEO SYSTEM
- SMO-210MP/150MP : ONLY NTSC VIDEO SYSTEM
Troubleshooting
You may encounter an unexpected problem while using this system that
makes it hard to use the system properly. In many cases, however, they are
minor problems rather than serious flaws in the system. 
Refer to the following tips for some possible solutions. 
If the problem persists, contact the local sales representative or service
center for support. 
Note
If the problem is related to VCR recording or playback, check the VCR
as well. 
Eng-19
When power will not come on
When the screen does not appear 
When record is not working 
When playback is not working
When the screen does not appear
in the Auto Sequence Switch
Mode 
•   Make sure that the cord is
properly plugged in.
•   Check the power cable.
•   Check the connections with  
the camera, accessories and the
external monitor.
•   Make sure the Video In port 
of the VCR and the VCR
Accessory Video Out port of this
system are properly connected. 
•   Check if the tape inserted into
the VCR is  able to record.  
•   Check that the REC Trigger Out
port of the Time Lapse VCR is
properly connected  to the VCR
Accessory TRIGGER (6PIN
VCR ACCESSORY) port of this
system when you record in the
Time Lapse Mode.
•   Make sure the Video Out port of
the VCR and the VCR Accessory
Video In port of this system  are
properly connected. 
•   Check if the Display Mode of
this system is in P.B. Mode or
Triplex Mode.
•   Check that the screen is in Live
Mode.
•   Check that the time of
“SEQUENCE” under the SETUP
MENU is properly set.