Samsung F500 Washing Machine with ecobubble, 7 kg Benutzerhandbuch
English - 28
Doing laundry
Doing laundry using the Cycle Selector
Your new washing machine makes washing laundry easy, using Samsung’s automatic control system "Fuzzy
Control". When you select a wash cycle, the machine will set the correct temperature, washing time, and
washing speed.
Control". When you select a wash cycle, the machine will set the correct temperature, washing time, and
washing speed.
1. Turn the water supply on.
2. Press the Power button to turn the power on.
3. Open the door.
4. Add your laundry loosely into the drum without overfilling it.
5. Close the door.
6. Add detergent, and if necessary, softener or prewash detergent into the appropriate compartments in
2. Press the Power button to turn the power on.
3. Open the door.
4. Add your laundry loosely into the drum without overfilling it.
5. Close the door.
6. Add detergent, and if necessary, softener or prewash detergent into the appropriate compartments in
the detergent drawer.
The Prewash function is only available when selecting the COTTON, SYNTHETICS, BABY CARE,
DAILY WASH, STAIN AWAY and SUPER ECO WASH cycles. It is only necessary if your clothing is
heavily soiled.
DAILY WASH, STAIN AWAY and SUPER ECO WASH cycles. It is only necessary if your clothing is
heavily soiled.
7. Use the Cycle Selector to select the appropriate cycle according to the type of material: COTTON,
SYNTHETICS, 15’ QUICK WASH, BABY CARE, DAILY WASH, STAIN AWAY, SUPER ECO WASH,
OUTDOOR CARE, WOOL and DELICATES. The relevant indicators will light up on the control panel.
OUTDOOR CARE, WOOL and DELICATES. The relevant indicators will light up on the control panel.
8. At this time, you can control the wash temperature, the number of rinse cycles, the spinning speed, and
the delay time by pressing the appropriate buttons.
9. Press the Start/Pause button to start the wash. The progress indicator will light up and the remaining
time for the cycle will appear on the display.
Both the total cycle time and the number of rinse cycles in the COTTON cycle may vary
depending on the amount of laundry.
depending on the amount of laundry.
10. After the total cycle has finished, the power will turn off automatically. Open the door and remove the
laundry.
Pausing the wash
Within 5 minutes of starting a wash, it is possible to add/remove laundry items.
1. Press the Start/Pause button to unlock the door.
If the water level or the water temperature inside the drum is too HIGH the door is not opened
with the blinking "Door Lock
with the blinking "Door Lock
" indicator. In this case, wait until the indicator stops blinking. (It
will take approximately 1 or 2 minutes until the indicator stops blinking.)
2. Open the door and add/remove the laundry.
3. After closing the door, press the Start/Pause button to restart the wash.
3. After closing the door, press the Start/Pause button to restart the wash.
F500E-03439A-06_EN.indd 28
2016-08-23 1:59:43