Samsung MAX-WS730 Benutzerhandbuch
The AM(MW/LW) aerial (for long and medium waves) can be:
Placed on a stable surface
Fixed to the wall (you must first remove the base)
The
AM aerial connector terminals are located on the rear of the sys-
tem and are marked
AM .
To avoid noise interference, check that the loudspeaker wires do
not run close to the aerial wires.
Always keep them at least 2 inches (5 cm) away.
not run close to the aerial wires.
Always keep them at least 2 inches (5 cm) away.
Connecting the AM Aerial
How to connect a COAXIAL TYPE aerial.
Connect a 75
Ω
antenna to the
FM antenna terminal.
Plug the connector on the
FM aerial supplied into the coaxial socket
(75
Ω
) marked
FM on the rear of the system.
Follow the instructions given on Page 13 to tune into a radio sta-
tion, and determine the best position for the aerial.
tion, and determine the best position for the aerial.
If reception is poor, you may need to install an outdoor aerial.
To do so, connect an outdoor
To do so, connect an outdoor
FM aerial to the FM socket on the rear
of the system using a 75
Ω
coaxial cable (not supplied).
Connecting the FM Aerial
GB
8
The auxiliary input can be used to take advantage of the
sound quality of your mini-compact system when listening to
other sources.
sound quality of your mini-compact system when listening to
other sources.
Examples: A
television
A video disc player
A Hi-Fi stereo video cassette recorder
To connect the external source, the source must have an audio
output. In addition, you need an RCA connection cable.
output. In addition, you need an RCA connection cable.
Set the system to standby mode and disconnect it and the external
source from the main.
source from the main.
Connect the audio cable to the rear of the mini-compact system.
Connect the...
To the connector marked...
Red jack
R (right)
White jack
L (left)
For optimum sound quality, do not invert the right and left
channels.
channels.
Plug the system back into the main socket and press Standby/On to
switch it on.
switch it on.
Select the AUX source by pressing AUX.
Result:
Result:
AUX
is displayed.
Switch the external source on.
Adjust the volume and balance as required:
Volume
Equalizer
Example: You can watch a film and take advantage of stereo sound
provided that the original sound track is in stereo (as if you
were in a cinema).
were in a cinema).
Connecting to an External Source
1
2
3
4
5
6
This unit can output CD digital sound signals through this
jack. Use an optical cable to connect digital audio equipment.
(DAT deck, MD recorder, etc.).
Remove the dust cap (1) from the CD DIGITAL OUT jack. Then,
connect an optical cable plug to the CD DIGITAL OUT jack.
jack. Use an optical cable to connect digital audio equipment.
(DAT deck, MD recorder, etc.).
Remove the dust cap (1) from the CD DIGITAL OUT jack. Then,
connect an optical cable plug to the CD DIGITAL OUT jack.
When the CD DIGITAL OUT jack is not being used
Attach the supplied dust cap.
CD Digital Out Jack
(1)
AM
4
3
MAX-WS730GBR-1~15 3/11/03 1:42 PM Page 8