Samsung HomeSync Benutzerhandbuch
Health and Safety Information 58
Section 8: Health and Safety Information
This device is capable of operating in Wi-Fi mode in the 2.4
and 5 GHz bands. The FCC requires that devices operating
within 5.15-5.25 GHz may only be used indoors, not outside,
in order to avoid interference with Mobile Satellite Services
(MSS). Therefore, do not use this device outside as a Wi-Fi
hotspot or in Wi-Fi Direct mode when using the
5.15-5.25 GHz band.
and 5 GHz bands. The FCC requires that devices operating
within 5.15-5.25 GHz may only be used indoors, not outside,
in order to avoid interference with Mobile Satellite Services
(MSS). Therefore, do not use this device outside as a Wi-Fi
hotspot or in Wi-Fi Direct mode when using the
5.15-5.25 GHz band.
This section outlines the safety precautions associated with
using your HomeSync device. The terms “HomeSync” or
“device” are used in this section to refer to your HomeSync
device. Read this information before using your device.
using your HomeSync device. The terms “HomeSync” or
“device” are used in this section to refer to your HomeSync
device. Read this information before using your device.
Exposure to Radio Frequency (RF)
Signals
HomeSync operates as a radio transmitter and receiver
(Wi-Fi). When it is turned on, it receives and transmits radio
frequency (RF) signals. This power can range from 0
microwatts to 25 milliwatts (maximum power: 13.5 dBm).
(Wi-Fi). When it is turned on, it receives and transmits radio
frequency (RF) signals. This power can range from 0
microwatts to 25 milliwatts (maximum power: 13.5 dBm).
Knowing Radio Frequency Safety
The design of your HomeSync complies with updated NCRP
standards described below:
standards described below:
In 1991–92, the Institute of Electrical and Electronics
Engineers (IEEE) and the American National Standards
Institute (ANSI) joined in updating ANSI’s 1982 standard for
safety levels with respect to human exposure to RF signals.
More than 120 scientists, engineers and physicians from
universities, government health agencies and industries
developed this updated standard after reviewing the
available body of research.
Engineers (IEEE) and the American National Standards
Institute (ANSI) joined in updating ANSI’s 1982 standard for
safety levels with respect to human exposure to RF signals.
More than 120 scientists, engineers and physicians from
universities, government health agencies and industries
developed this updated standard after reviewing the
available body of research.
In 1993, the Federal Communications Commission (FCC)
adopted this updated standard in a regulation. In August
1996, the FCC adopted a hybrid standard consisting of the
existing ANSI/IEEE standard and the guidelines published by
the National Council of Radiation Protection and
Measurements (NCRP).
adopted this updated standard in a regulation. In August
1996, the FCC adopted a hybrid standard consisting of the
existing ANSI/IEEE standard and the guidelines published by
the National Council of Radiation Protection and
Measurements (NCRP).
For more information about RF exposure, visit the FCC Web
site at
site at
FCC Radio Frequency Emission
This device meets the FCC Radio Frequency Emission
Guidelines. FCC ID number: A3LGTB9150 [Model Number:
GT-B9150].
Guidelines. FCC ID number: A3LGTB9150 [Model Number:
GT-B9150].