Samsung SCX-3205W Benutzerhandbuch

Media and tray_ 50

4. Pinch the paper length guide to adjust the guide so that it is flush up 

against the rear edge of the paper; then pinch the paper width guides so 

they are flush against the sides of the paper.

•

Do not push the paper width guide too far causing the media to 

warp. 

•

Do not use a paper with more than 6 mm (0.24 inch.) curl. 

•

If you do not adjust the paper width guides, it may cause paper 

jams.

1. Open the front door, pinch the paper length guide and pull it out to 

extend the tray. Then, adjust the tray size to the media size you are 

loading (See "Changing the tray size" on page 49).

2. Flex or fan the edge of the paper stack to separate the pages before 

loading papers.

3. Place the paper with the side you want to print facing up.

When you print a document, set the paper type and size for the tray.
For information about setting the paper type and size on the control 

panel (See "Setting the default tray and paper" on page 46).

•

If you experience problems with paper feeding, check whether 

the paper meets the media specifications. Then, try placing 

one sheet at a time in tray (See "Print media specifications" on 

page 93, and "Printing on special media" on page 51).

•

The settings made from the machine driver override the 

settings on the control panel.

The tray can hold special sizes and types of print material, such as 

postcards, note cards, and envelopes. It is useful for single page printing on 

letterhead or colored paper.

•

If you select Paper > Source > Manual Feeder from your printer 
driver, you need to press 

 Start button each time you print a page.

Load only one type, size and weight of print media at a time in the 

tray.

•

To prevent paper jams, do not add media while printing. 

•

Print media should be loaded face up with the top edge going into 

the tray first and be placed in the center of the tray.

•

Always load the use recommended print media to avoid paper jams 

and print quality problems (See "Print media specifications" on 

page 93).

•

Flatten any curl on postcards, envelopes, and labels before loading 

them into the tray.

1. Load the paper in the tray.

•

When printing on special media, you must follow the 

loading guideline (See "Printing on special media" on 

•

When paper does not feed well while printing, gently push 

the paper in manually until it starts feeding automatically. 

2. Squeeze the tray paper width guides and adjust them to the width of 

the paper. Do not force them too much, or the paper will bend 

resulting in a paper jam or skew.

3. Open the output tray and support. 
4. To print from an application, open the application and open the print 

menu.

5. Open Printing Preferences (See "Opening printing preferences" on 

page 55).

6. Click on the Paper tab in Printing Preferences, and select an 

appropriate paper type.

For example, if you want to use a label, set the paper type to 

Label.

7. Select Manual Feeder in paper source, then press OK.
8. Start printing.