Samsung External Dispenser French Door Benutzerhandbuch

 

Operating

Check the 

water level

Test button

 Vegetable & 

 Fruit Drawers

Ice-Maker

Deli Drawer

Operating your SAMSUNG French Door 

Refrigerator

usinG tHE CoLD watER DisPEnsER

using the ice Dispenser

Place a glass underneath the ice dispenser and push gently against the dispenser lever with your glass.

Make sure the glass is in line with the dispenser to prevent the ice from bouncing out. 

Press the ice / water button to select the type of you want

Select this if you 

want to turn ice 

maker off.

PUSH

Caution

•    When Cubed Ice is selected after using the Crushed Ice feature, a small amount of 

residual crushed ice might be produced.

•  Water Dispenser Installation

    After installation, press the dispenser arm for at least 2 minutes to remove trapped air 

from the water line and to fill the water system.

Caution

Please wait 2 seconds before removing the glass under the dispenser to prevent spills.

If the Refrigerator door opens, the Dispenser does not work.

using the water dispenser

Place a glass underneath the water outlet and push gently against the water dispenser lever with your glass. 

Make sure the glass is in line with the dispenser to prevent the water from splashing out.
If you have just installed the refrigerator or installed a new water filter,Flush 3 gallons through filter before use (flush 

approximately 6 minutes). Make sure that water flows clearly again before drinking.

using the ice off Function

When selecting the Ice Off mode, remove all ice cubes from the bucket. If you are not 

using the ice dispenser, the ice cubes may clump together. Pull the lock lever 

forward to throw away ice cubes or remove clumped ice from the bucket. 

Push the bucket back until you hear a click.

Caution

When you do not use the water dispenser for 2~3 days (especially during the summer), the dispensed water 

may have a funny smell or taste. If this occurs, we recommend that you discard the first 1~2 glasses for better 

tasting water. 

Caution

•    In case ice doesn’t come out, pull out the ice bucket and press test button 

    located on the right side of ice maker.

•    Do not press the test button continuously when the tray is filled with ice or water 

    as illustration. Water may overflow or ice jamming may occur.

•    Normal Use
         To fill ice bucket to maximum capacity after installation, make sure to do the  following steps.
   1.   Allow your refrigerator to operate and cool down for 24 hours (or 1 full day).

   2.  Waiting 24 hours will allow your ice maker to cool properly.

   3.  Dispense 4 to 6 ice cubes into the glass.

   4.  After 8 and 16 hours, dispense a full glass of ice at each time.

When you dump the ice from the ice bucket, you should press the

dispenser lever once with ‘ICE CUBED’ or ‘CRUSHED’ function

ON to get new ice faster after replacing the ice bucket in the refrigerator.
Whenever all ice is used at one time, the above step 3 and4 must be 

repeated (before dispense the first 4 to 6 ice cubes, it needs waiting 8 hours). 

This will replenish the ice cubes and ensure maximum ice production.

Caution