Samsung Evolution Kit for 2012-2013 models Benutzerhandbuch

Seite von 221
180
There is a problem with the broadcast.
The Problem
Try this!
The TV is not receiving 
all channels.
If your TV is not connected to a cable box or satellite box:
 
● Confirm that the coaxial cable is securely connected to the TV. 
 
● If you are using an antenna, verify it is positioned correctly and the all the 
connections are secure.
 
● Run 
Setup
 (
System
 > 
Setup
) or 
Auto Program
 (
Broadcasting
 > 
Auto Program
).
There are no captions 
with digital channels.
Go to 
Caption
 (
System
 > 
Accessibility
 > 
Caption
) and change the 
Caption Mode
.
Some channels may not have caption data.
The picture is distorted.
The compression of the video content may cause picture distortions. This is 
especially true with fast moving pictures from sports programs and action 
movies.
A weak signal can cause picture distortions. This is not a problem with the TV.
My computer won't connect.
The Problem
Try this!
The "Mode Not 
Supported" message 
appears.
Set your PC’s output resolution so it matches a resolution supported by the TV.
The video is OK but 
there is no audio.
If you are using an HDMI connection, check the audio output setting on your PC.
If you are using a DVI to HDMI cable, a separate audio cable is required.
I can't connect to the Internet.
The Problem
Try this!
The wireless network 
connection failed.
Confirm your wireless modem/router is on and connected to the Internet.
Reset your wireless modem/router by turning it off, waiting for 15 seconds, and 
then turning it on again.
Run Network Setup (
MENU
 > 
Network
 > 
Network Settings
).
The software update 
over the Internet has 
failed.
Check the network connection status (
MENU
 > 
Network
 > 
Network Status
).
If the TV is not connected to a network, connect to a network.
The upgrade stops if you already have the latest software version.