Samsung SR8895 Benutzerhandbuch

Seite von 240
Maintain tools and fi lter _41
Maintain tools and fi lter
04  MAINT
AIN TOOLS AND FIL
TER
CLEANING THE ROBOTIC VACUUM CLEANER
CLEANING THE EDGE-CLEANING SIDE ROTATING BRUSH
2.  Wearing rubber gloves, wrap the side rotating brush 
with a cloth using hot water for about 10 seconds 
and wipe it on the cloth.
1.  Check whether the side rotating brush is bent or 
whether there are any foreign substances stuck on 
the brush.
You must turn off the Power Switch at the bottom of the 
main unit before cleaning the robotic vacuum.
3.  Turning the side rotating brush, repeat the 
procedures in Step 2.
4.  If hair or string is wrapped between the main unit 
and the side rotating brush, undo the screw of the 
side rotating brush using a (+) driver to remove it.
     When reassembling the brush, check the “L” mark 
on the edge-cleaning side rotating brush and the 
“L” mark on the main unit and then reassemble the 
side rotating brush.
    (  Letter “R” is carved at the right side rotating 
brush.)
NOTE
Because the side rotating brush easily attracts hair and other foreign substances, 
make sure to clean it frequently.
Excessive foreign substances on the side rotating brush can damage the brush.
L