Samsung HT-TX500 Benutzerhandbuch

Example : Presetting FM 89.10 in the memory 

• This unit does not receive AM broadcasts.

Press the TUNER button to select the FM band.

Press the 

button to select <89.10>.

Press the TUNER MEMORY button.

<CH 1> flashes in the display. 

Press the

button to select preset number.

You can select between 1 and 15 presets.

Press the TUNER  MEMORY button again.

Press the TUNER MEMORY button before “Number” disappears from the display.

“Number” disappears from the display and the station is stored in memory.

To preset another station, repeat steps 2 to 5.

To tune in to a preset station, press the 

button on the remote

control to select a channel.

Press the SLEEP button.

Each time the button is pressed, the preset time changes as follows : 

10 

➝

20 

➝

30 

➝

60 

➝

90 

➝

120 

➝

150 

➝

OFF.

To confirm the sleep timer setting, press the SLEEP button.

The remaining time before the Home Theater will shut itself off is displayed.

Pressing the button again changes the sleep time from what you have set earlier.

To cancel the sleep timer, press the SLEEP button until <OFF> appears on 

the display.

Each time you press and hold the DIMMER button for more than 2 seconds,

the following functions are selected in order: BUZZER

➝

BUZZER : Turns off the buzzer that rings each time you press any of the top buttons on the main

unit.Each time you press and release the DIMMER but-ton, it toggles between BUZZER
ON and OFF.

HOLD : Locks the top buttons on the main unit. Each time you press and release the DIMMER

button, it toggles between HOLD ON and OFF.

Press the DIMMER button.

Each time the button is pressed, the brightness of front display will be adjusted.

You can adjust the brightness of the display on the main unit so it won't interfere with your movie viewing.

Press the MUTE button.

” appears in the display.

To restore the sound, press the MUTE button again.

HT-TX500_NO EUR_ENG-1002(46~71)  10/22/07 5:02 PM  Page 60