Canon ir5800c, ir5800cn, irc6800c, irc6800cn Handbuch
3
2 General Circuit Diagram
Signal Names
List of Signal Names/Abbreviations (Finisher Unit)
The following presents the abbreviations of signals used in this manual and in drawings, and the meaning of each signal.
Reference: Signals enclosed by brackets [ ] are electrical signals, However, the state “1” or “0” of these analog signals cannot be indicated. Otherwise, the state of digital signals “1” or “0” can be indicated.
List of Signal Names/Abbreviations (Finisher Unit)
The following presents the abbreviations of signals used in this manual and in drawings, and the meaning of each signal.
Reference: Signals enclosed by brackets [ ] are electrical signals, However, the state “1” or “0” of these analog signals cannot be indicated. Otherwise, the state of digital signals “1” or “0” can be indicated.
T-2-1
ASSIST-HP
REAR END ASSIST GUIDE HP DETECT Signal
BIND-CL
STACK EJECTION LOWER ROLLER CLUTCH DRIVE Signal
BUFF-P-SL
BUFFER REAR END HOLDING SOLENOID DRIVE Signal
BUFF-
ROL-SL
ROL-SL
BUFFER ROLLER ALIENATE SOLENOID DRIVE Signal
DELIV-
ROL-SL
ROL-SL
1ST DELIVERY ROLLER ALIENATE SOLENOID DRIVE Signal
F-COVER
FRONTCOVER OPEN/CLOSE DETECT Signal
F-COVER-
SW
SW
FRONT DOOR CLOSED DETECT SWITCH Signal
FJOG-HP
FRONT ALIGNMNT PLATE HP DETECT Signai
G-
CHANGE-
HP
CHANGE-
HP
GEAR CHANGE HP DETECT Signal
INLET
INLET PAPER DETECT Signal
INLET-
ROL-SL
ROL-SL
INLET ROLLER ALIENATE SOLENOID DRIVE Signal
JOGTRY-P
PROCESSING TRAY PAPER DETECT Signal
RJOG-HP
REAR ALIGNMNT PLATE HP DETECT Signal
SHUT-CL
SHUYYER OPEN/CLOSE CLUTCH DRIVE Signal
SHUT-HP
SHUTTER HP DETECT Signal
STP-HP
STAPLER HP DETECT Signai
STP-
INFERE
INFERE
STAPLER ALIGNMENT INTERFERENCE DETECT Signal
STP-LS
HOOK EMPTY DETECT Signai
STP-
READY
READY
HOOK TOP POSITION DETECT Signai
STPSFT-
HP
HP
STAPLER SHIFT HP DETECT Signal
STP-SW
CARTRIDGE DETECT SWITCH Signal
SWG-HP
SWING GUIDE HP DETECT Signai
SWG-SW
SWING GUIDE OPEN DETECT SWITCH Signal