Apple imac g5 17 inch Befestigung Anweisungen

2 -

iMac G5 Power Supply, 17-inch

Important Things to Know

Note:

These instructions cover the iMac G5 (17-inch) models. The models may look

slightly different from one shown in the illustration; however, the following
procedure applies to both models.

1. The replacement power supply has an ambient light sensor attached with two plastic

rivets. If your computer doesn’t have an ambient light sensor (see next step), remove
the ambient light sensor from the replacement power supply.

2. How do you tell if you have an iMac G5 with the ambient light sensor? Look at the

picture below. Along the bottom of the display bezel, next to the middle case screw is
a small bump protruding from the case. This is the ambient light sensor.

3. All customer removable screws are brass colored

Do not remove screws unless

they are brass colored, or you will void your warranty.

4. Ground yourself when working on the computer. The procedure will show you how to

ground yourself.

5. Do not pull on individual wires when disconnecting a part; pull on the connector.

6. A magnetized “L”-shaped Phillips screwdriver is included with the replacement part.