Acer p5260ep Benutzerhandbuch

20

English

Management Setting

ECO Mode

Choose “On” to dim the projector lamp which will lower power 

consumption, extend the lamp life and reduce noise.  Choose ”Off” 

to return normal mode.

Auto Shutdown

(Minutes)

The projector will auto shutdown while there is no signal input 

after the allocated time. (in minutes)

Source Lock

When source lock is turned "Off", the projector will search for 

other signals if the current input signal is lost. When source lock is 

turned "On", it will “Lock” the current source channel unless you 

press “SOURCE” button on the remote control for next channel.

Menu Location

Choose the Menu location on the display screen

Startup Screen

Use this function to select your desired startup screen. If you 

change the setting, the changes will take effect when you exit the 

OSD menu.

Acer: The default startup screen of Acer projector.

User: Use memorize picture from "Screen Capture" function.

Screen Capture

 

Use this function to customize the startup screen. To capture the 

image that you want to use as the startup screen, follow the 

instructions below.

Notice:

Before proceeding with the following steps, make sure that the 

"Keystone" is set to the default value 0 and the aspect ration is set 

to 4:3.  For details, refer to the "Image Setting" section.

Change the "Startup Screen" from the default setting "Acer" 
to "User".

Press "Screen Capture" to customize the startup screen.

A dialog box appears to confirm the action. Choose "Yes" to 
use the current image as your customized startup screen. The 

capture range is the red rectangular area. Choose "No" to 

cancel the screen capture and exit the onscreen display (OSD).

A message appears, stating that the screen capture is in 
progress.

When the screen capture is finished, the message disappears 
and the original display is shown.

The customized startup screen, as shown below, take effect 
when there is a new input signal or when you restart the 

projector.