Apple emac ati usb2 2005 Servicehandbuch

44 - eMac ATI Graphics/USB 2.0/2005 Troubleshooting

Date and Time Symptom Charts

1.

Turn your computer off by choosing Shut Down from the Apple menu. Unplug all cables, except the 

power cord, from your computer.

Warning:  If your internal modem (included on some models) is connected to a telephone line, disconnect 

the telephone line from the internal modem port before you open the access panel. This prevents electric 

shock.

2.

Place a soft, clean towel or cloth on the desk or surface. Slowly lift up and turn the computer so the 

screen is facing down on the cloth.

3.

Use a Phillips screwdriver to remove the screw on the memory access panel. Then gently remove the 

access panel.

4.

Touch metal inside the computer. This helps protect the computer from damage caused by 

electrostatic discharge. Note: Always do this before you touch any parts, or install any components, 

inside the computer. To avoid generating static electricity, do not walk around the room until you have 

finished installing the memory and closed the computer.

5.

 Disconnect the power cord from the computer.