Apple emac ati usb2 2005 Servicehandbuch

18 -  eMac ATI Graphics/USB 2.0/2005   Upgrades

 AirPort Extreme Card

3.

Attach the antenna cable firmly to the port on the end of the card. (Figure 8)

4.

Push the AirPort Extreme card firmly into the slot until you feel the card “snap” into the 

logic board connector. Note: One quick check to identify if the card is properly 

installed is to check the plastic tab on the card. The edge of the tab should be almost 

flush (Figure 9) with the face of the bezel. If the card isn't fully snapped in, more of the 

tab will be easily visible.