Lenoxx Electronics CD-10 Benutzerhandbuch
IB-CD10(SL)-WM-E-052605
TROUBLE SHOOTING
Problem
Remedy
The power is not on.
There is no sound.
•
Adjust the volume.
•
Unplug the headphones when listening through
speaker.
speaker.
•
Check the batteries.
“
”
appears in the display
even when a CD is in place.
•
Insert the CD with the label side outward.
10
•
Insert the AC plug into a wall outlet securely.
•
Make sure the batteries are installed correctly
and that they are fresh.
and that they are fresh.
•
Rotate the VOLUME/POWER OFF switch
downwards to turn on the set.
downwards to turn on the set.
•
Clean the CD, or replace it if the CD is badly
damaged.
damaged.
•
Place the player in a location free from vibration.
•
Check if your batteries are fresh.
•
Make sure that the CD compartment is closed
properly.
properly.
•
Clean the CD or try another CD, this set will
not play MP3 or WMA discs.
not play MP3 or WMA discs.
•
Replace the disc (this set will not play damaged
or scr atched C Ds), or buy a disc repair
polisher to repair the scratched disc yourself.
or scr atched C Ds), or buy a disc repair
polisher to repair the scratched disc yourself.
•
Take out the CD and leave the CD DOOR open
for about an hour to dry moisture condensation.
for about an hour to dry moisture condensation.
The sound drops out.
CD does not play.
No sound on battery
power or weak sound.
power or weak sound.
•
Make sure the CD is seated on the center spindle
and “clicked” into place before closing the door.
and “clicked” into place before closing the door.
•
Your batteries are weak or dead. Replace all
batteries with new ones.
batteries with new ones.
•
Make sure the CD is inserted onto the spindle
and “clicked” into place & close the door.
and “clicked” into place & close the door.
IB-CD10(SL)-WM-E-050705.pmd
5/26/2005, 9:23 AM
11