Apple designing airport networks Benutzerhandbuch
48
Chapter 4
AirPort Network Designs
How It Works
•
The base station uses your Ethernet network to communicate with the Internet and
receives power through the Ethernet WAN ( ) port.
receives power through the Ethernet WAN ( ) port.
•
AirPort clients access the Internet and the Ethernet network through the AirPort
Extreme Base Station.
Extreme Base Station.
Note: AirPort Extreme Base Stations that support Power over Ethernet (PoE), are set up
by default to act as a bridge, and the “Share a single IP address (using DHCP & NAT)”
option is not selected. Use the Network pane of AirPort Admin Utility if you want to
select the “Share a single IP address (using DHCP & NAT)” option.
by default to act as a bridge, and the “Share a single IP address (using DHCP & NAT)”
option is not selected. Use the Network pane of AirPort Admin Utility if you want to
select the “Share a single IP address (using DHCP & NAT)” option.
What You Need for a Power Over Ethernet Connection
What to Do
Follow the instructions in the section, “You’re Using an Existing Ethernet Network” on
page 37, to set up the AirPort network.
page 37, to set up the AirPort network.
Setting Advanced Options
Using the AirPort Extreme Base Station or AirPort Express
as a Bridge
as a Bridge
You can turn off the base station’s Internet sharing features (which provide IP addresses
to AirPort computers using DHCP or NAT) to allow bridging between the network’s
wireless and wired computers. With bridging turned on, AirPort computers have access
to all services on the Ethernet network, and the base station does not provide Internet
sharing services.
to AirPort computers using DHCP or NAT) to allow bridging between the network’s
wireless and wired computers. With bridging turned on, AirPort computers have access
to all services on the Ethernet network, and the base station does not provide Internet
sharing services.
Using the base station as a bridge can be a way to address incompatibilities between
the base station’s Internet sharing features and your ISP’s connection method.
the base station’s Internet sharing features and your ISP’s connection method.
To use the base station as a bridge, all AirPort and Ethernet computers need to have
IP addresses set manually and use the same subnet mask.
IP addresses set manually and use the same subnet mask.
Components
Check √
Comments
AirPort Extreme Base Station or
multiple base stations that
support PoE
multiple base stations that
support PoE
802.3af-compliant Power
Sourcing Equipment (PSE)
Sourcing Equipment (PSE)
Plenum-rated Ethernet cables
If you are mounting the base
station in the air-handling space
above a suspended ceiling, you
need to use plenum-rated
Ethernet cables.
station in the air-handling space
above a suspended ceiling, you
need to use plenum-rated
Ethernet cables.
LL0214.book Page 48 Monday, October 25, 2004 4:06 PM