Apple power mac g5 late 2004 Befestigung Anweisungen

Seite von 6
 
073-0918 Rev. A
 
 
 
 
Power Mac G5
 
Front Panel Board Cable
 
Replacement Instructions
 
Follow the instructions in this sheet carefully. Failure to follow these instructions could 
damage your equipment and void its warranty.
 
Note:
 
 Online instructions are available at http://www.info.apple.com/installparts/.
 
Tools Required
 
No tools are required for this procedure.
 
Opening the Computer
 
1. Shut down the computer.
 
Warning:
 
 Always shut down the computer before opening it to avoid damaging its 
internal components or the components you are installing. Do not open the computer 
or attempt to install items inside it while it is on. 
2. Wait 5 to 10 minutes to allow the computer’s internal components to cool.
 
Warning:
 
 After you shut down the system, the internal components can be very hot. 
You must let the computer cool down before continuing.
3. Unplug all external cables from the computer except the power cord.
4. Touch the metal PCI access covers on the back of the computer to discharge any 
static electricity from your body. 
 
(Figure 1)
Important:
 
 Always discharge static before you touch any parts or install any 
components inside the computer. To avoid generating static electricity, do not walk 
around the room until you have finished working and closed the computer.