Apple powermac server g3 minitow Servicehandbuch
Take Apart
Power Supply - 37
IMPORTANT:
You must set the power supply voltage switch
to the correct setting (115V in the U.S.) to avoid damaging
the computer. See “Voltage Switch” in Basics for
instructions and an international voltage chart. The switch
is accessible through the computer’s rear panel when the
power supply is installed.
IMPORTANT:
There is a power supply jumper on the logic
board located next to the PCI slots. If the logic board is
installed in the PM G3 Minitower, the power supply jumper
must cover the pins marked “PS”. If the logic board is
installed in the PM G3 Desktop model, the jumper must
cover the pins marked “Mac”. The logic board comes from
the factory preset for the Desktop model (i.e. the power
supply jumper covers the pins marked “Mac”).