Apple powermac server g3 minitow Servicehandbuch

 

 Basics

Data Buses - 17

 

The internal EIDE bus supports the internal CD-ROM or 

DVD-ROM drive. You can connect another EIDE device, such 

as an EIDE hard drive, to the second channel of the EIDE bus. 

(Note that in the standard G3 Minitower configuration, there 

is already an ATA hard drive attached to the second EIDE 

channel. Some build-to-order G3 Minitowers, however, 

come with the optional Ultra Wide SCSI card and Ultra Wide 

SCSI hard drive, in which case the second EIDE channel is 

available.) You can install an EIDE device in one of the 

available expansion bays.

 

There are two EIDE connectors on the G3 Minitower logic 

board, which are marked J9 and J10.  Use the internal 

ribbon cable with the 40-pin connector to connect EIDE