Apple powermac g3 blue.white Servicehandbuch
Basics
Drives Installed - 24
installed in the lower part of the computer in drive bay 1,
near the front of the computer. If it came with two drives, the
second one is installed in drive bay 2. If a third drive is
installed, it’s in drive bay 3. The factory sets the drive in
bay 1 to start up. The startup drive can be changed in the
control panel.
Additional internal Ultra2 LVD SCSI devices connect to the
data cable supporting the drive that came with the computer.
This cable has a built-in terminator so you don’t need to add
one.
You must assign a SCSI ID number to every additional device
and the number must not conflict with the ID number already
assigned to a drive on the SCSI chain. If the computer came
with one Ultra2 LVD SCSI drive, it has ID 0. If the Macintosh
came with two drives, they have ID 0 and 1. A third factory-
installed drive has ID 2. The SCSI PCI card has ID 7.