APart MBR150 Merkblatt
APart MBR150
AMPLIFIER
TECHNICAL SPECIFICATIONS
WWW.APART-AUDIO.COM
INFO@APART-AUDIO.COM
The MBR150 is a compact monoblock power amplifier that can be used as a stand-alone
or modular amplifier. The amplifier accepts 2 ohm loads what allows you to connect up to 8
pieces of 16 ohm loudspeakers in parallel.
The amplifier is equipped with a selectable RPO (Remote Power On) system. This means the
amplifier can be activated in three ways (selection via the external switch at the back):
1. Via the power on switch at the front pannel
2. Via the Auto Power On setting. As soon as an audio signal is present, the amplifier will
function
3. Via the 5-24 Volt setting. An external 5-24Vdc signal will activate the amplifier.
Beside this RPO system, the volume of the MBR150 can be controlled over distance via any
external remote up-down switch.
or modular amplifier. The amplifier accepts 2 ohm loads what allows you to connect up to 8
pieces of 16 ohm loudspeakers in parallel.
The amplifier is equipped with a selectable RPO (Remote Power On) system. This means the
amplifier can be activated in three ways (selection via the external switch at the back):
1. Via the power on switch at the front pannel
2. Via the Auto Power On setting. As soon as an audio signal is present, the amplifier will
function
3. Via the 5-24 Volt setting. An external 5-24Vdc signal will activate the amplifier.
Beside this RPO system, the volume of the MBR150 can be controlled over distance via any
external remote up-down switch.
A bass - treble tone control and headphone jack for monitoring on the front pannel allow
you to achieve a perfect sound quality.
you to achieve a perfect sound quality.
At the back pannel, a low cut switch is available. This makes it possible to drive small
satellites or PA speakers. On the other hand, the loudness button will enhance the lowand
high frequencies. This will result in a more pleasant sound at low level volumes.
satellites or PA speakers. On the other hand, the loudness button will enhance the lowand
high frequencies. This will result in a more pleasant sound at low level volumes.
Input Line in
Output Link
Output Power (RMS Program)
Output Link
Output Power (RMS Program)
Frequency Response
Tone control
Limiter
Distortion
Remote volume
Remote power on selector
Loudness
Low cut
Power Supply
Dimensions (H x W x D)
Weight
Tone control
Limiter
Distortion
Remote volume
Remote power on selector
Loudness
Low cut
Power Supply
Dimensions (H x W x D)
Weight
RCA Cinch unbalanced, 775 mV, 20 kOhm
Parallel to input RCA Cinch
8 Ohm: 100 watt / 140 watt Max
4 Ohm: 150 watt / 180 watt Max
2 Ohm: 170 watt / 200 watt Max
20 Hz - 30 kHz
Bass 70 Hz +/- 10 dB, Treble 10 kHz +/- 10 dB
Dynamic-slow @ -3 dB, defeatable
<0.02%
Euroblock; via up - down contact
On/off switch on front - by audio signal - by 5-24Vdc
Via push button
100 Hz, 12 dB/oct.
230V
140 x 70 x 335 mm
3.8 Kg
Parallel to input RCA Cinch
8 Ohm: 100 watt / 140 watt Max
4 Ohm: 150 watt / 180 watt Max
2 Ohm: 170 watt / 200 watt Max
20 Hz - 30 kHz
Bass 70 Hz +/- 10 dB, Treble 10 kHz +/- 10 dB
Dynamic-slow @ -3 dB, defeatable
<0.02%
Euroblock; via up - down contact
On/off switch on front - by audio signal - by 5-24Vdc
Via push button
100 Hz, 12 dB/oct.
230V
140 x 70 x 335 mm
3.8 Kg