APart PAM7.2 Merkblatt
APart PAM7.2
PRE-AMPLIFIER
TECHNICAL SPECIFICATIONS
WWW.APART-AUDIO.COM
INFO@APART-AUDIO.COM
The PAM7.2 is a very compact pre-amplifier that can be used as a stand alone or modular
pre-amplifier.
pre-amplifier.
It has 5 stereo line inputs and 2 microphone inputs. A separate 3 band tone control is
available for the line and microphone inputs. Each microphone input is equipped with
limiters and phantom power that can be switched of internaly. Microphone input 1 can have
priority via VOX (Voice activated mixing) or via an external priority contact at the back of the
amplifier. The stereo / mono switch is standard.
available for the line and microphone inputs. Each microphone input is equipped with
limiters and phantom power that can be switched of internaly. Microphone input 1 can have
priority via VOX (Voice activated mixing) or via an external priority contact at the back of the
amplifier. The stereo / mono switch is standard.
Input Line 1-5 stereo
MIC1: Front - rear
MIC2: Rear
Output stereo
Frequency Response
Tone control
Signal to Noise Ratio
Distortion
Power Supply
Dimensions (H x W x D)
Weight
MIC1: Front - rear
MIC2: Rear
Output stereo
Frequency Response
Tone control
Signal to Noise Ratio
Distortion
Power Supply
Dimensions (H x W x D)
Weight
RCA Cinch unbalanced, 500 mV, 10 kOhm
Balanced jack -50dB / 600 Ohm
Balanced jack -50dB / 600 Ohm
RCA Cinch unbalanced 0 dB / 1V
20 Hz - 25 kHz
Bass 70 Hz +/- 10 dB, Mid 1 kHz +/- 10 dB, Treble 10 kHz +/- 10 dB
>90 dB
<0.01%
230V
140 x 70 x 325 mm
1.9 Kg
Balanced jack -50dB / 600 Ohm
Balanced jack -50dB / 600 Ohm
RCA Cinch unbalanced 0 dB / 1V
20 Hz - 25 kHz
Bass 70 Hz +/- 10 dB, Mid 1 kHz +/- 10 dB, Treble 10 kHz +/- 10 dB
>90 dB
<0.01%
230V
140 x 70 x 325 mm
1.9 Kg