Alcatel-Lucent speedtouch 500 Benutzerhandbuch
268
NAT Commands
RELATED COMMANDS:
foreign_port
The port of the routable host.
Select one of the supported TCP/UDP port names (See
Select one of the supported TCP/UDP port names (See
for a listing of
TCP/UDP port names supported by the SpeedTouch™).
Alternatively, specify the protocol number. Do not use '0' in case a
foreign IP address is specified.
Applicable for TCP and UDP protocols only. Other protocols do
not need a port to be specified.
Alternatively, specify the protocol number. Do not use '0' in case a
foreign IP address is specified.
Applicable for TCP and UDP protocols only. Other protocols do
not need a port to be specified.
OPTIONAL
Delete a static NAT/PAT entry.
Disable NAT/PAT on a SpeedTouch™ IP address.
Enable NAT/PAT on one of the SpeedTouch™ IP addresses.
List NAT/PAT connection database.