Alcatel-Lucent speedtouch 500 Benutzerhandbuch
203
IP Commands
ip config
Show/set global IP stack configuration options.
SYNTAX:
ip config
[forwarding = <{off|on}>]
[firewalling = <{off|on}>]
[redirects = <{off|on}>]
[sourcerouting = <{off|on}>]
[netbroadcasts = <{off|on}>]
[ttl = <number{0-255}>]
[fraglimit = <number{1-1024}>]
[defragmode = <{normal|always|nat}>]
[addrcheck = <{off|own|static|dynamic}>]
[mssclamping = <{off|on}>]
[firewalling = <{off|on}>]
[redirects = <{off|on}>]
[sourcerouting = <{off|on}>]
[netbroadcasts = <{off|on}>]
[ttl = <number{0-255}>]
[fraglimit = <number{1-1024}>]
[defragmode = <{normal|always|nat}>]
[addrcheck = <{off|own|static|dynamic}>]
[mssclamping = <{off|on}>]
forwarding
Disable (off) or enable (on) the IP routing functionality.
OPTIONAL
firewalling
Enable (on) or disable (off) IP firewalling (master switch).
If applicable the CLI firewall level allows configuration of the Speed-
Touch™ firewall.
For security reasons this parameter is enabled per default.
It is strongly recommended never to disable the SpeedTouch™ fire-
wall.
If applicable the CLI firewall level allows configuration of the Speed-
Touch™ firewall.
For security reasons this parameter is enabled per default.
It is strongly recommended never to disable the SpeedTouch™ fire-
wall.
OPTIONAL
redirects
Disable (off) or enable (on) the sending of ICMP redirect messages.
A router can send a redirect message in case a shorter path than
the path followed is discovered.
For security reasons this parameter is disabled per default.
A router can send a redirect message in case a shorter path than
the path followed is discovered.
For security reasons this parameter is disabled per default.
OPTIONAL
sourcerouting
Disallow (off) or allow (on) IP source routed packets.
IP source routed packets are packets with the route to follow speci-
fied in the header.
For security reasons this parameter is disabled per default.
IP source routed packets are packets with the route to follow speci-
fied in the header.
For security reasons this parameter is disabled per default.
OPTIONAL
netbroadcasts
Disallow (off) or allow (on) net directed broadcasts.
This parameter is per default disabled.
In case netbroadcasts are allowed no traces of netbroadcasts are
generated.
This parameter is per default disabled.
In case netbroadcasts are allowed no traces of netbroadcasts are
generated.
OPTIONAL
ttl
A number between 0 and 255.
Represents the default time-to-live (ttl) for locally generated IP
packets. This parameter determines the number of hop-counts the
IP packet may pass before it is dropped.
Generally the time-to-live is 64 hop-counts.
By limiting the time-to-live continuous circulation of IP packets on
the network without ever reaching a destination is avoided.
Represents the default time-to-live (ttl) for locally generated IP
packets. This parameter determines the number of hop-counts the
IP packet may pass before it is dropped.
Generally the time-to-live is 64 hop-counts.
By limiting the time-to-live continuous circulation of IP packets on
the network without ever reaching a destination is avoided.
OPTIONAL