Alcatel-Lucent omniaccess 6000 Benutzerhandbuch
OmniAccess 6000: Installation Guide
58
Part 031639-00
May 2005
If the system is powered up, the module’s Power LED will light up green if the
line card is inserted properly.
line card is inserted properly.
Secure the line card.
Use a #2 Phillips or cross-head screwdriver to push in the captive fastening
screws and turn them clockwise until moderate resistance is felt. Do not
over-tighten.
screws and turn them clockwise until moderate resistance is felt. Do not
over-tighten.
Connect the appropriate network cables.
Line card ports are described under
5
6