Alcatel-Lucent 8410d Benutzerhandbuch
15
Display, Softkeys, and Control Buttons
Entering Softkey Mode and Viewing the Three Feature Option Screens
There are three separate feature option screens. Each of these screens allows you to select from four different features.
You can enter Softkey Mode by pressing the display option button labeled <Menu>. The following is an example of a
feature option screen.
feature option screen.
Prog Pause Mark Wait
The top line of each feature option screen shows you the status of each of the four features. An arrow appears above the
feature name or abbreviation if that feature is active. If there is no arrow above the feature, the feature is not active.
feature name or abbreviation if that feature is active. If there is no arrow above the feature, the feature is not active.
Note:
If the feature requires you to dial a telephone number or extension, such as Call Forwarding, you will
temporarily see the digits you are dialing, rather than the arrow, above the feature name.
temporarily see the digits you are dialing, rather than the arrow, above the feature name.
The second line on each feature option screen shows the features you can access. To use any of these features, you
must press the softkey below the feature name or abbreviation. For example, on the feature option screen shown
previously, you can insert a .5 second pause (or multiple pauses) into an autodial number by pressing the softkey below
Pause during programming. Pressing the Pause softkey repeatedly will insert a longer pause.
must press the softkey below the feature name or abbreviation. For example, on the feature option screen shown
previously, you can insert a .5 second pause (or multiple pauses) into an autodial number by pressing the softkey below
Pause during programming. Pressing the Pause softkey repeatedly will insert a longer pause.
To see the next set of four features, press the display control button labeled <Next>; to move back a screen, press the
display control button labeled <Prev>. Press <Next> or <Prev> until the feature you want to use appears on the second
line.
display control button labeled <Prev>. Press <Next> or <Prev> until the feature you want to use appears on the second
line.
Note:
An error tone (one beep) sounds when you have made a mistake in your softkey entries.
Press <Exit> at any time to exit softkey mode and return to Normal (call-handling) Mode.
Other Softkey Features That May Be On Your Display
Other options that might be available on your softmenu are
Abbreviation Feature
AD
Abbreviated Dialing (can be multiple buttons)
AutoCB Automatic
Callback
CFrwd
Call Forwarding All Calls
Cnslt Consult
Count
ACD Stroke Count (can be up to 10 buttons)
CPkUp Call
Pickup
Dir Directory*
Excl Manual
Exclusion
HFAns
Internal Auto Answer
Inspt Inspect
Last
Last Number Dialed
RngOf Ringer
Off
SAC
Send All Calls
SFunc
Abbreviated Dialed Special Function