Alcatel-Lucent 8410d Benutzerhandbuch

Seite von 25
23 
To see the date and time 
1 Press 
<Menu> and then press the softkey below TmDay or, if TmDay is not available on your display, press 
<Date/Time>
• 
The display returns to Normal Mode after a few seconds. 
Note: 
The telephone gets this information automatically, you will not need to set it. 
 
Timer 
 
You can access this feature with the softkeys only if the feature name, Timer, appears on the second line of one of the 
feature option screens. 
To see elapsed time (hours, minutes, seconds) 
1 Press 
<Menu> and then press the softkey below Timer or, if Timer is not available on your display, press 
<Timer>
• 
The elapsed time is shown. 
2 
To stop the timer and clear the display, press <Menu> and then press the softkey below Timer again or, if Timer 
is not available on your display, press <Timer> again. 
• 
The elapsed time is displayed on the screen for about four seconds and then disappears. 
 
 
Transfer 
 
To send the present call to another extension or outside number 
1 Press 
<Transfer>
[dial tone] 
• 
The present call is put on hold and the green light next to the held call flutters. 
• 
You are given a new call appearance. 
2 
Dial the number to which the call is to be transferred. 
[ringback tone] 
3 
Remain on the line and announce the call; if there is no answer or the line is busy, return to the held call by pressing 
its <xxxxx>
4 Press 
<Transfer> again. 
• 
The call is sent to dialed number. 
5 
Hang up.