Alesis wildfire Benutzerhandbuch

This knob gives you the ability to equalize (EQ) the low 
frequencies present in your guitar’s audio signal. This 
setting is not related to the EQ module found on the 
EFFECT knob. Rather, it provides an additional means 

of controlling the bass frequencies.  
 
When you turn the BASS knob, the amount of bass in 
the current program will increase or decrease 

accordingly, the EDITED light will turn on, and the 
display will briefly show the BASS setting. When you 
save a program, the current BASS value is saved with it 
so that it can be recalled later. 

 

This knob works the same way as the BASS knob, 
except that it controls the high frequencies of the audio 
signal. 
 

The MASTER VOLUME knob controls the overall 

volume of the audio signal that is output to the speaker, 
the HEADPHONES jack and the STEREO LINK 
OUTPUT on the rear panel. This value is not stored 
with a program.

 

 

Plug your headphones into this jack using a standard 

1/4” stereo phone plug. If your headphones are 1/8”, 
you can find a 1/8” to 1/4” adapter in most electronics 
stores. The internal speaker, STEREO LINK OUTPUT 
and SPEAKER OUTPUT are automatically disabled 

when you are using headphones.

 

 

Use this switch to turn the Wildfire on and off.