Manualsbrain.com
  1. Handbücher
  2. Marken
  3. Alpine
  4. cde-9873rb
  5. Benutzerhandbuch

Alpine cde-9873rb Benutzerhandbuch

Download
Seite von 36
14
-EN
01GB05CDE-9873RB.fm
ALPINE CDE-9873RB 68-05946Z85-A (EN)
2
-2 Press SOURCE/
 to select the desired bass 
bandwidth.
Changes the boosted bass bandwidth to wide or narrow. A 
wider setting will boost a wide range of frequencies above 
and below the centre frequency. A narrower setting will 
boost only frequencies near the centre frequency.
2
-3
*
1
Turn the Rotary encoder to select the desired 
bass level (–7~+7).
You can emphasize or weaken the bass level.
3
Press and hold 
/ESC for at least 2 seconds to 
return to normal mode.
• If no operation is performed for 15 seconds, the unit will return to 
normal mode automatically.
• The bass level settings will be individually memorized for each 
source (FM, MW (LW), CD, etc.) until the setting is changed. The 
bass frequency and bass bandwidth settings adjusted for one source 
are effective for all other sources (FM, MW (LW), CD, etc.).
• The function is inoperable when DEFEAT is set to ON.
*
1
The adjustment can also be made by pressing the Rotary encoder. 
Refer to “Adjusting Bass/Treble/Balance (Between Left and Right)/
Fader (Between Front and Rear)/Defeat” (page 13).
Setting the Treble Control
You can change the Treble Frequency emphasis to create your own 
tonal preference.
1
Press A.SEL/RTN repeatedly to select the TREBLE 
mode.
BASS  
TREBLE  
HPF  
BASS
2
-1 Press BAND/TA to select the desired treble centre 
frequency.
10.0 kHz 
 12.5 kHz 
 15.0 kHz 
 17.5 kHz 
 10.0 kHz
Emphasizes the displayed treble frequency ranges.
2
-2
*
2
Turn the Rotary encoder to select the desired 
treble level (–7~+7).
You can emphasize the treble level.
3
Press and hold 
/ESC for at least 2 seconds to 
return to normal mode.
• If no operation is performed for 15 seconds, the unit will return to 
normal mode automatically.
• The treble level settings will be individually memorized for each 
source (FM, MW (LW), CD, etc.) until the setting is changed. The 
Treble frequency settings adjusted for one source are effective for all 
other sources (FM, MW (LW), CD, etc.).
• The function is inoperable when DEFEAT is set to ON.
*
2
The adjustment can also be made by pressing the Rotary encoder. 
Refer to “Adjusting Bass/Treble/Balance (Between Left and Right)/
Fader (Between Front and Rear)/Defeat” (page 13).
Adjusting the High Pass Filter
The High Pass Filter on this unit can be adjusted to suit your personal 
taste.
1
Press A.SEL/RTN repeatedly to select the HPF 
mode.
BASS  
TREBLE  
HPF  
BASS
2
Turn the Rotary encoder to select the desired HPF 
frequency.
OFF 
 80 Hz 
 120 Hz 
 160 Hz
3
Press and hold 
/ESC for at least 2 seconds to 
return to normal mode.
• If no operation is performed for 15 seconds, the unit will return to 
normal mode automatically.
• The function is inoperable when DEFEAT is set to ON.
Turning Loudness On/Off
Loudness introduces a special low- and high-frequency emphasis at low 
listening levels. This compensates for the ear’s decreased sensitivity to 
bass and treble sound.
Press and hold Rotary encoder (LOUD) for at least 2 
seconds to activate or deactivate the loudness mode.
• The function is inoperable when DEFEAT is set to ON.
Setting the Bass Bandwidth
Setting the Bass Level
Setting the Treble Centre Frequency
(Narrow)
(Wide)
Setting the Treble Level
01GB00CDE-9873RB.book  Page 14  Monday, October 23, 2006  10:57 AM