Alpine cde-7860r Benutzerhandbuch
FR
ES
DE
SE
IT
5
-EN
Turning Power On and Off
1
Press the POWER button to turn on the unit.
NOTE
The unit can be turned on by pressing any other button
except the eject c button.
The unit can be turned on by pressing any other button
except the eject c button.
The volume level gradually increases to the
previous level you were listening to before the
unit was turned off.
Press and hold the POWER button again for at
least 3 seconds.
previous level you were listening to before the
unit was turned off.
Press and hold the POWER button again for at
least 3 seconds.
NOTE
The very first time the power is turned on, the volume
will start from level 12, and the LOUD function will be
on in the tuner mode.
The very first time the power is turned on, the volume
will start from level 12, and the LOUD function will be
on in the tuner mode.
Adjusting Volume/Balance
(Between Left and Right)/Fader
(Between Front and Rear)
(Between Left and Right)/Fader
(Between Front and Rear)
1
Press the MODE button repeatedly to choose
the desired mode.
Each press changes the modes as follows:
the desired mode.
Each press changes the modes as follows:
Volume: 0 ~ 35
Balance: L15 ~ R15
Fader: R15 ~ F15
Subwoofer: 0 ~ +15
Balance: L15 ~ R15
Fader: R15 ~ F15
Subwoofer: 0 ~ +15
NOTES
• If the Rotary encoder (CDM-7874R only) is not
rotated or the
5 or 6 button (CDM-7872R/CDM-
7871R/CDE-7860R only) is not pressed in 5 seconds
after selecting the BALANCE and FADER modes, the
unit automatically sets in the VOLUME mode.
after selecting the BALANCE and FADER modes, the
unit automatically sets in the VOLUME mode.
• *When the subwoofer is set to ON, the level of the
subwoofer can be adjusted.
2
Rotate the Rotary encoder (CDM-7874R only)
or press the
or press the
5 and 6 buttons (CDM-7872R/CDM-
7871R/CDE-7860R only) until the desired sound
is obtained in each mode.
is obtained in each mode.
Turning Loudness On/Off
Loudness introduces a special low- and high-
frequency emphasis at low listening levels. This
compensates for the ear's decreased sensitivity
to bass and treble sound.
frequency emphasis at low listening levels. This
compensates for the ear's decreased sensitivity
to bass and treble sound.
1
Press and hold the LOUD button for at least
2 seconds to activate or deactivate the loudness
mode. The display shows "LOUD ON" when the
loudness mode is activated.
2 seconds to activate or deactivate the loudness
mode. The display shows "LOUD ON" when the
loudness mode is activated.
Audio Mute Function
Activating this function will instantly lower the
volume level by 20 dB.
volume level by 20 dB.
1
Press the MUTE button fto activate the MUTE
mode. The audio level will decrease by about 20
dB.
Pressing the MUTE button again will bring the
audio back to its previous level.
mode. The audio level will decrease by about 20
dB.
Pressing the MUTE button again will bring the
audio back to its previous level.
→ VOL → SUB-W* → BAL → FAD